Let the unaware be aware

**Phoenix** · 13th December 2005, 08:13 AM

Looks a bit dodgy, why wreck what appears to be a perfectly good vehicle :?

Parts from all sides for sale as well, nicked maybe?

**Ace** · 13th December 2005, 09:16 AM

Sounds like a total ******. I would check it out but between yesterday lunchtime and now someone has gotten into the internat server and put a block on ebay at work.

Not happy jan. Matt

**Ace** · 13th December 2005, 11:56 AM

I just sent him an email. In the question on their he has told a person they will fit his 95 disco. Matt

HSVRangie · 13th December 2005, 01:24 PM

16x10 rim from land rover I dont think so.

16*8 yes.

Michael.

**one_iota** · 13th December 2005, 01:46 PM

Originally posted by Ace
I just sent him an email. In the question on their he has told a person they will fit his 95 disco. Matt

I suspect that he will not reply to "informed" questions. It takes a rat to smell a rat. Questions relating to the quantity of cupholders might get a response :roll: . After all don't they fit all Land Rovers (particularly useful in Series 2 traybacks). :wink:

**p38arover** · 13th December 2005, 02:44 PM

Originally posted by HSVRangie
16x10 rim from land rover I dont think so.

16*8 yes.

For a D2, more likely to be 16 x 7

Ron

**RoverOne** · 13th December 2005, 03:02 PM

Originally posted by p38arover+--><div class='quotetop'>QUOTE(p38arover)</div><div class='quotemain'><!--QuoteBegin-HSVRangie
16x10 rim from land rover I dont think so.

16*8 yes.

For a D2, more likely to be 16 x 7
Ron[/b][/quote]

Agree with you Ron.

Cheers
Bryce

**one_iota** · 13th December 2005, 05:33 PM

I expressed interest in two items and received emailed answers:

The wheels: I indicated that I thought that they wouldn't fit a Series 1 Disco:

<div class='quotetop'>QUOTE</div><div class='quotemain'>
I have always understood all Discovery lug configurations to be the same from 92 models to 04. My wheels don't fit the brand new Landrover 3 and they won't fit Range Rover pre 87, but I haven't had the chance to fit mine on a earlier Disco to find out so its probably best to contact your LR dealership. Thanks
[/b][/quote]

The bonnet re fit for series 1 Disco.

<div class='quotetop'>QUOTE</div><div class='quotemain'>Yes it will fit, the outside dimensions, bolt holes etc, are the same, however it is a different shape to the 95 model, more raised at the front and honestly better looking, also the lettering is different, larger more modern looking. Hope this helps.
[/b][/quote]

This man would sell rusty rabbit traps to the CSIRO as an environmentally sustainable rodent control system :roll:

Talk about spin.

**rick130** · 13th December 2005, 07:41 PM

the description has been updated. :wink:

<div class='quotetop'>QUOTE</div><div class='quotemain'>Have since found out these rims will only fit Series II Discoverys (99-04). They are 16X7 wide and have a 57mm offset. They will not fit Disco I or Defender as stated in an anwer to a question listed below. My apologies.[/b][/quote]

**Slunnie** · 13th December 2005, 08:13 PM

I sent this at 1043 today:
<div class='quotetop'>QUOTE</div><div class='quotemain'>Gday Mate,
Just so you are aware, your rims are most definately 16x7, not 16x10. You can read this measurement on the outer of the rim. They will also only fit Discovery series 2 (99-04)and P38a Range Rovers specifically. They wont fit Disco 1's (which the asker has)or Disco3's, nor any other Range Rover apart from the P38a and they wont fit any of the Defenders or any other 4WD. The 5 stud diameter, nut hole and center hole is completely different to the regular Toyota/Nissan etc stud pattern.[/b][/quote]
and he replied with this at 1843 tonight:
<div class='quotetop'>QUOTE</div><div class='quotemain'>Thanks slunnie, boy was I wrong. I'll update my info.[/b][/quote]

Thread: Let the unaware be aware

Thread Tools

Bookmarks

Bookmarks

Posting Permissions