Results 1 to 8 of 8

Thread: Defender Cargo Barrier

  1. #1
    Join Date
    Jan 1970
    Location
    Perth
    Posts
    727
    Total Downloaded
    0

    Defender Cargo Barrier

    I'm needing to get a Cargo Barrier for the Defender and want to know what's the go in your humble opinions. So
    1: Who has what?
    2: Where from?
    3: How much?
    4: How easy was it to instal?

    Cheers Tyrepower.

  2. #2
    Join Date
    Jan 1970
    Location
    South Yundreup,WA.
    Posts
    7,468
    Total Downloaded
    0
    I have a Milford barrier. It is reasonably easy to fit yourself. Just takes a little time as it is fiddly with the trim. If you allow 6hrs at a slow easy going pace it should be fine.
    2011 Discovery 4 TDV6
    2009 DRZ400E Suzuki
    1956 & 1961 P4 Rover (project)
    1976 SS Torana (project - all cash donations or parts accepted)
    2003 WK Holden Statesman
    Departed
    2000 Defender Extreme: Shrek (but only to son)
    84 RR (Gone) 97 Tdi Disco (Gone)
    98 Ducati 900SS Gone & Missed

    Facta Non Verba

  3. #3
    Join Date
    Jan 1970
    Location
    Free Again Thanks Dan
    Posts
    10,150
    Total Downloaded
    0
    mine is a milford , unknown how much or where from cause it came with my bub

  4. #4
    numpty's Avatar
    numpty is offline TopicToaster Silver Subscriber
    Join Date
    Jan 1970
    Location
    Nundle
    Posts
    4,077
    Total Downloaded
    0

    Cargo Barrier

    I have two in my Stage 1, both made by me. One goes behind rear seat, and if I remove rear seat, this one comes out and the other fits behind front seats from floor to roof. Bit fiddly to make if you follow the contours and curves, but not difficult. Naturally it doesn't conform to any design standards, but then it is only to stop what I carry in the back.
    Perry.

  5. #5
    Join Date
    Sep 2007
    Location
    Ocean Reef WA
    Posts
    3,098
    Total Downloaded
    0

    Defender cargo barrier.

    I got mine from these people. Cost around $400 for a Milford and he came to my place to fit it. Very convenient.
    Russell at ARB Osbourne Park recommended him and he didn't do a bad job.
    Cheers.
    AlanH

    Addabar
    47 Sugarwood Drv Thornlie 6108 (08) 9256 1510
    Mobile Service 0409 298 249

  6. #6
    Join Date
    Jan 1970
    Location
    Sydney, Northern Beaches
    Posts
    917
    Total Downloaded
    0
    Mine is an Ausguard bought from Opposite Lock in Brookvale (NSW) They are cheaper than Milford but built to the same standards. I had mine fitted at Opposite Lock and it all came in at under $400.


  7. #7
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    1,575
    Total Downloaded
    0
    Yup Milford, Opposite Lock, less than $400 but that was 4 years ago. 8)

  8. #8
    Join Date
    Jan 1970
    Location
    Brisbane
    Posts
    5,521
    Total Downloaded
    0
    Mine was Milford... apparenty there was some substantial confusion about some minor differences in the 05 models, and fitting between the child restraint and the seat... probably neither are issues you have to worry about...
     2005 Defender 110 

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!