That's the one, thanks Gav.
Printable View
That's the one, thanks Gav.
I'd love to see the calcs they used to get to 40T,,
That could be the very same unit I saw. The picture is Terex's facility at Pinkenba.Quote:
Originally Posted by Homestar
Any idea of the reach ??
Just shy of 20 metres.Quote:
Originally Posted by pop058
AT 40 Pick and Carry Crane | Terex Cranes
There is a typo there - it says 60m/19.8m - I think they mean 60f/19.8m
Prospective customer, Paul? It could be handy in your line of work.[wink11]Quote:
Originally Posted by pop058
Reach is what most cranies look for. How much can it lift at full stick?
5,200Kg at 45 degrees boom angle with boom at 19.8 metres (10 metres from front of crane). Straight out with a flat boom, 2,950kg but not much use like that anyway. Full spec sheet is just 2 clicks away on the link I posted.Quote:
Originally Posted by Bigbjorn
A bit big for us.Quote:
Originally Posted by V8Ian
We had one on a job today,a little 10T,it only just fitted through the gates on the site so it could get in position
It was at max reach,with a fly,only just got to a fan weighing 100KG on a roof.
Yes i know Ian,you were referring to the other Paul.[tonguewink]
A couple of tonne under a flat stick would cover 99 % of my work. Most of our stuff is covered by a 20T franna and ocassionally a 30T Slew if we need a bit more reach.
Attachment 147584
