Filler neck gasket

**Rob2** · 16th November 2019, 12:00 PM

How the bloomin heck do you replace the top filler neck gaskit on an early Disco1 ?

Do you have to get at it from under the car ?

Ta.

**p38arover** · 16th November 2019, 07:45 PM

Gasket or the hose connecting the filler neck to the tank?

**Rob2** · 17th November 2019, 07:11 AM

I mean the little round bugger below the filler cap.
Its a tighr fit and I guess you have to lower the whole filler neck from below ?

**workingonit** · 18th November 2019, 02:49 PM

Originally Posted by Rob2

I mean the little round bugger below the filler cap.
Its a tighr fit and I guess you have to lower the whole filler neck from below ?

Goes to goo!

From memory you can, by a little amount, pull the neck below the level of the hole. Fit new rubber to hole. Push filler neck through hole in rubber, but may require a probe like a large screw driver to apply downward pressure here and there around the rubber while pushing the filler neck upward. Should sort of 'pop' into place when in the right alignment.

**Rob2** · 19th November 2019, 06:51 AM

Originally Posted by workingonit

Goes to goo!

From memory you can, by a little amount, pull the neck below the level of the hole. Fit new rubber to hole. Push filler neck through hole in rubber, but may require a probe like a large screw driver to apply downward pressure here and there around the rubber while pushing the filler neck upward. Should sort of 'pop' into place when in the right alignment.

Thanks,
I weill give that a go.

Thread: Filler neck gasket

Thread Tools

Filler neck gasket

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions