Looks like someone is trying to copy the Lemforder logo, but replacing the Owl with the "L".
Does anyone recognise this logo? Its on the metal plate on the back of the ball-joint in suspension arms that were purchased as being made by a particular manufacturer, but as I've just replaced the 2nd one after 25K kms I very much doubt that it was made by this manufacturer. The 1st was replaced 6 months ago but its premature demise was excused due to its boot being split. It's not the usual logo for the manufacturer.
logo.jpg
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
Looks like someone is trying to copy the Lemforder logo, but replacing the Owl with the "L".
They were sold as Lemforder. The original arms have what appears to be the Lemforder logo in the casting following the casting numbers but no logo on the backing plate. The new replacements were packaged as Delphi and the backing plate stamped Delphi.
PS The order still accessible on the supplier's website has Lemforder in the item description.
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
Send your picture to Lemforder for their advice. They will surely know the answer.
Don.
A search for Lemforder logos doesn't include this one though.
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
The AU Lemforder people haven't seen the logo but are making inquiries.
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks