Reply With QuoteThat's a very good idea, but I would be putting better clamps on
Andrew
TopicToaster
When i was getting all the parts for the 90 (in the UK) for the trip around aus. The chap at the parts place said Oh you need a set of coolent hoses and you want the land rover geniune experdition set of hoses. Now i had never heard them . I told of few people about them and i am surprised how no one here has heard of them.
Now what makes them differant , is that they have joints at the y sections and other bits. So what this means is that if one of the hoses goes then you just go to a garage or shop and buy a bit of hose and connect it in the system . So you don't have hunt around for a complete land rover system. Smart eh . Or you could just carry two lengths of the differant size hose and replace when need .
As ou can see look normal
But you have connectors instead of the rubber joints Y bits, so they can come apart
95 300 Tdi Defender 90
99 300 Tdi Defender 110
92 Discovery 200tdi
50 Series 1 80
50 Series 1 80
www.reads4x4.com
Master
That's a very good idea, but I would be putting better clamps on
Andrew
TopicToaster
Originally Posted by Andrewpv01
That's a very good idea, but I would be putting better clamps on
Andrew
Nah they are ok , stronger than the jubble clips you attc the hose to the engine with
95 300 Tdi Defender 90
99 300 Tdi Defender 110
92 Discovery 200tdi
50 Series 1 80
50 Series 1 80
www.reads4x4.com
AT REST
G'day Reads90
You haven't got, or can you get, a Part Number for those, that is the sort of thing that should be standard fitment on ALL Australian Vehicles
BTW those hose clips were standard types until the worn type Utilux made an appearance in the 60's BUT if over tightened will cut the hose as it ages
cheers
TopicToaster
I have not got a part number , but will get one from the chap i got them from in the uk, or maybe it might be on the invoice for the items . mmmmm will have a look when i get homeG'day Reads90
You haven't got, or can you get, a Part Number for those, that is the sort of thing that should be standard fitment on ALL Australian Vehicles
BTW those hose clips were standard types until the worn type Utilux made an appearance in the 60's BUT if over tightened will cut the hose as it ages
cheers
95 300 Tdi Defender 90
99 300 Tdi Defender 110
92 Discovery 200tdi
50 Series 1 80
50 Series 1 80
www.reads4x4.com
LordRover
Subscribersome nice bunnings poly pipe fittings will do !
MY08 TDV6 SE D3- permagrin ooh yeah
2004 Jayco Freedom tin tent
1998 Triumph Daytona T595
1974 VW Kombi bus
1958 Holden FC special sedan
AT REST
G'day Loanrangie
I wouldn't like to trust Poly fittings under pressure AND heat in an Automotive enviorement, those fittings look like they are metal,with seal lips.
cheers
TopicToaster
G'day Loanrangie
, those fittings look like they are metal,with seal lips.
cheers
Yeah they are
95 300 Tdi Defender 90
99 300 Tdi Defender 110
92 Discovery 200tdi
50 Series 1 80
50 Series 1 80
www.reads4x4.com
ChatterBox
SubscriberI want.
The Ugly Duckling-
03 Defender Xtreme, now reduced by 30%.
a master of invisibleness.
Master
SupporterThat's funny....
Just the other day I was looking at the bottom 300 TDi hose and thinking I should make up some of the fancy bends and junctions so I could use straight through hose in an emergency. Two days later and it appears LR thought of it first. Yeah, part numbers please.
'95 110 300TDI, F&R ARB Lockers, Twine Shower, Aux Sill Tank, Snorkel, Cargo barrier, 9 seats, swingaway wheel carrier, MadMan EMS2
'85 110 Isuzu NA 4BE1 3.6l Diesel, 0.996 LT-95, Rear Maxi (SOLD)
'76 SIII 109" Nissan ED33 5-SP Nissan GBox (SOLD)
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks