What colour is your Disco?
I'm toying with the idea of having my alloys painted to match the colour of the car. The dark grey alloys came standard on the tombraider Defenders but they are very rare in AU so painting looks like my only option ...
![]()
No not a thread on modern art or any of that crystal gripping hippie nonsense.
I am thinking about spraypainting the steel rims on my disco 1, and thought I might venture outside the traditional silver on silver look the factory suggested.
Has anybody painted their rims any colours other than the traditional and what did they end up like?
Pictures would be great
Cheers
Jason
What colour is your Disco?
I'm toying with the idea of having my alloys painted to match the colour of the car. The dark grey alloys came standard on the tombraider Defenders but they are very rare in AU so painting looks like my only option ...
![]()
Last edited by Greylandy; 17th October 2007 at 12:06 PM.
Those wheels are extremely rare in Australia because the local Tombraider just had the usual silver Defender alloys.
Jason, you could always just quickly paint one or more wheels to see how it looks.
Some think the car looks tougher with black wheels but it might look odd on an otherwise stock car.
Scott
I like the white rims on the white disco, but otherwise I think the silver ones look best.
It does depend on the car a bit though, I like black on the dark green discos.
1994 Discovery TDi
2004 Discovery 2 TD5
2010 Discovery 4 TDV6
1961, Series 2 Ambulance. 108-098 - Eden
Registry of Ex Military Land Rovers Mem. 129
Defence Transport Heritage Tasmania Member
I have both Black Disco rims and a Darker Grey rims - all custom offsets
LRH
Disco 4 SDV6 Auto
Disco 4 SDV8 Dual Cab Project
Disco 2 M57 Extra Cab Project
Foton Tunland Cummins ISF
Disco 1 3 door 4.6 V8 Auto
RRC V8 Auto "Classic" Softdash
RRC 300 TDI Auto
Disco 1 TD5 Auto Buggy
Disco 1 300 Tdi Auto Ute
SAME Explorer 70HP 4x4 Tractor plus Nell Loader
Subaru GDA WRX
Triumph Bonneville SE
Yamaha TTR250
Me Again
My disco id Rioja Red. It has a 2' lift, nudge bar and soon to have roof rack (all in black) I was thinking of going black on the rims too but thought it may look toooooooooo much. the darker (metalic) gray sounds like an option.
Or posibly the stock silver rim with a black centre?
Who knows, but at least paint is (relativly) cheap
To LYHybrid, are your offsets on a Disco? if so could you post a picture. What mods are needed to run offsets (doesn't it affect bearing life etc?)
Keep the ideas coming
Jason
That was meant to read a 2" lift
A 2' lift.....I wish......i wouldn't care about wheel colour then, cause I'd never see the bl**dy things!!!
Jason
My rims are on my Rangie:
and the D110:
![]()
Disco 4 SDV6 Auto
Disco 4 SDV8 Dual Cab Project
Disco 2 M57 Extra Cab Project
Foton Tunland Cummins ISF
Disco 1 3 door 4.6 V8 Auto
RRC V8 Auto "Classic" Softdash
RRC 300 TDI Auto
Disco 1 TD5 Auto Buggy
Disco 1 300 Tdi Auto Ute
SAME Explorer 70HP 4x4 Tractor plus Nell Loader
Subaru GDA WRX
Triumph Bonneville SE
Yamaha TTR250
The silver on mine was getting scratched too so I went for black......these shots aren't great for seeing the wheels but will give you some idea.
![]()
Last edited by waynep; 17th October 2007 at 02:26 PM.
I have silver dynamic rims for road tyres and black eastern wheel works rims with play tyres for my Charcoal Disco.
I have always like black rims, but the Silver / Charcoal works well and looks great.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks