Thread: Axle Stand type thing wanted... but from where...

Steve,

What you want is an "ALKO" heavy duty adjustable "Jockey Wheel Jack Stand". They replace the jockey wheel on your trailer, have a base plate instead of the wheel, and a wind-up jacking handle. You can get them in a range of lengths / heights.

Should be able to get them through Trailer Parts WA -

Bayswater 9279 5777
O'Connor 9314 2222
Wangara 9302 2800

Hope this helps. Cheers ............... BM

Thanks for that BM, i looked at those, unfortunately i cant use them as they dont swing up, and the draw bar sits too low to have just a normal type lift up one. The jockey wheel i have is a 10" swing up type...

i will have another look tho.. as maybe i could run both on there...

another bit of info.. its a twin axle trailer and i cannot lift the drawbar. The noseweight is pretty high... otherwise i'd be picking it up and dumping it on a stand..

Thanks

Steve

No worries Steve. Another option might be to install a drop down corner jack (as fitted under the corners of camper trailers / caravans) under your drawbar. Most of these fold up flat when not in use, and there are various designs available which will drop down onto the ground, and then you can wind the legs down further to get the lift you need.

The one I'd look at is the BIG FOOT 590MM ALKO Part no: AS-2177. Any decent trailer parts supplier should be able to get these. Have a look at

Caravan,RV,Marine and Motorhome parts and accessories online, rollout awnings

Another couple of places to look are

Caravan and Trailer Jacks

RV - 00 RV Accessories

I was at supercheap the other day and they were selling axle stands with screw thread adjustment, brand was Stanfred or similar two-name combination.

I have a pair, same brand that I bought a dozen years ago, still going strong.

I saw that the new ones come with a grease nipple to lubricate the threads.

Look the goods.

Cheers
Simon

just nick an acro prop from someones scaffolding

preferrably when not in use!!

secondary benefit, if you are working under a roof and mount the prop between floor and ceiling, it can also prevent the boat tipping up if all the weight is in the back. I'd mount it in the jockey wheel's clamp too for extra security.

Steve give Camec a ring 9351 0000 they will have it

Unit 1, 175 Welshpool Road

Adam