Thread: Help with plastic T pieces on 93 petrol RR

Making your own will be fine. It's just a breather connection.

Originally Posted by Darryl Prizeman

A pipe runs from the Right hand rocker cover to the air intake before the butterfly which has a plastic T piece in it. A smaller pipe run from the T piece to inlet manifold. Mine is broke, I received a quote of $62 dollars for a replacement. If this is my only option then so be it but I am not into waisting $'s.

Does any one know if there is a problem with knocking one up out of copper.

thanks

Local hardware or spare parts place will have a suitable alternative, mine are chrome metal, should be no problem finding a replacement, Regards Frank.

For correct running you need to have the right ID for the small hose side. There a metal ones around.

The ID is a fair bit smaller then the OD so retic pipes wont work.

The breather T piece is not just a hardware shop bit.
There is a restrictor in the small pipe to enable the engine to idle.
So pay the money. These were made by Maxi Drive.
Regards Philip A

Julian,

Two questions,

1: Whats the Damage on the replacement t-piece

2: How soon can you send me one?

Luke

Originally Posted by PhilipA

The breather T piece is not just a hardware shop bit.
There is a restrictor in the small pipe to enable the engine to idle.
So pay the money. These were made by Maxi Drive.
Regards Philip A

Mal did make them, but as Maxidrive is no longer around we make them up now.

Luke I'll email you with price, have a few here.