Page 3 of 5 FirstFirst 12345 LastLast
Results 21 to 30 of 42

Thread: Split rims

  1. #21
    Join Date
    Jan 1970
    Location
    Close enough to their Shire to smell the dirty Hobbit feet
    Posts
    8,059
    Total Downloaded
    0
    Disco rims are pretty robust, what advantages are to be had by fitting split rims?

  2. #22
    Join Date
    Apr 2002
    Location
    Godwin Beach 4511
    Posts
    20,689
    Total Downloaded
    32.38 MB
    the ease of changing tyres i would imagine...
    2007 Discovery 3 SE7 TDV6 2.7
    2012 SZ Territory TX 2.7 TDCi

    "Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
    "If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
    'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
    “What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
    "We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
    "The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius

  3. #23
    Join Date
    Jan 1970
    Location
    Close enough to their Shire to smell the dirty Hobbit feet
    Posts
    8,059
    Total Downloaded
    0
    Quote Originally Posted by incisor View Post
    the ease of changing tyres i would imagine...
    But at the same time wouldn't having a 2 piece wheel let sand, mud and other crap enter? Plus wouldn't you have to run tubes?

  4. #24
    Join Date
    Apr 2002
    Location
    Godwin Beach 4511
    Posts
    20,689
    Total Downloaded
    32.38 MB
    not sure what his real aims are but a lot of really remote work is done on conventional tyres with tubes and split rims
    2007 Discovery 3 SE7 TDV6 2.7
    2012 SZ Territory TX 2.7 TDCi

    "Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
    "If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
    'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
    “What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
    "We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
    "The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius

  5. #25
    olbod Guest
    The reason for split rims is because all steel radials in 750x16x6 14 Ply
    can only be fitted to split rims. Yes, you have to run tubes.
    I have never had a problem with dirt entering.

    The reason to use the all steel radials is because the steel belts go right over, from bead to bead.
    This means they have stronger side walls that are less prone to damage from mulga stakes, hidden stumps and sharp rocks.
    They have a less agressive tread and no big lugs overlapping onto the sidewall, which means they are less likely to jag a stake and direct it thru the tyre. They are also able to be repaired in a lot of cases.
    They handle the outback tracks and dunes quite ok, once you know how to use these tyres. They dont handle wet conditions very well tho, I used to carry a set of chains for the back wheels but I only had to use them a couple of times, fortunately, because they cut up the tracks.
    We are only talking here about travelling across country, bush bashing,
    where there are no tracks, for days at a time. For instance, a trip from
    the Tanami or Gunbarrel to Lake Mackay, etc. These are my kind trips.

    The conventional steel belted radials, like Cooper and my BFG's only
    have the steel belts under the tread and no real side wall strength.
    Believe me, they are virtually useless, in real prolonged off road conditions
    and are very quickly destroyed by stakes and a plug repair kit wont help.
    If I was going to just stick to the tracks, like the Gunbarrel, Oodnadatta
    or Simpson, etc, I would quite happily stick with my BFG's, as I have been doing.
    I hope this answers a few questions.
    Cheers.

    PS: I used to carry spare tubes, punture repair kit and a few large patches for the inside of the tyres. The duration of the trip and location,
    determines how much spares you take.

  6. #26
    Join Date
    Jan 1970
    Location
    2780
    Posts
    8,257
    Total Downloaded
    0
    Thanks for that, it's what I always assumed, but never had confirmed.

    And time for me to use my favourite tyre link again.

    Beadell Tours - Tyre Information

    Simon

  7. #27
    olbod Guest
    I used to be rabbiting, for a couple of years, in the dunes west of the corner and in the scrub east of the Flinders and there is no way that
    I would use the conventional Cooper or BFG type tyre over there.
    Apart from two trips across the simpson in 62 and 77, without seeing a track and a trip to the cape in 64, all of my bush bashing was done in the 80's and 90's in my 73 Nissan Patrol. I kept it untill 1997 and sold it after my wife had serious heart operations. It had split rims and I used 12 ply
    Goodyear's. They were pretty good and were on full time but I only got
    around 45k out of them. Tyre bloke told me to try the 14 ply ?

    With the Disco I have only been travelling around outback Queensland but I want to take it over to the western deserts.
    Can you imagine a trip down along the WA-NT border line between the Tanami and the Gunbarrel ? We would need two or three vehicles tho,
    one tray top dedicated to carrying extra spare fuel, besides our own
    load.

    Simon, those Beadel people would be the ones to ask about petrol
    supplies around Woomera and Giles, wouldn't they.
    I would love to go and pay my respects to Lennie at his memorial.
    Cheers.

  8. #28
    Davo is offline ChatterBox Silver Subscriber
    Join Date
    May 2007
    Location
    WA
    Posts
    2,595
    Total Downloaded
    0
    If you find someone to modify rims, can you please post details? I don't think that set-up is the best for highway and track use, but it is the best for what you want to use it for and and I'd love a set.
    At any given point in time, somewhere in the world someone is working on a Land-Rover.

  9. #29
    olbod Guest
    Davo I will start ringing wheel men around the country next week and will
    let you knowl

    I still wonder if 110 or 130 split rims will fit an early Disco.
    Nobody has said they wont and unfortunately I dont know anyone up
    here that has either vehicle that I could use too check. For all I know, toyota split rims might fit ?

    Interesting thing about the area in the dunes and scrub east of Arkaroola
    and Lake Frome, out to the dog fence.
    There are quite a number of old abandoned mines around. They didn't dry
    up but were abandoned in the nineteenth century because it was too dry
    and they couldn't get enough water in.
    There are a lot of dry creek beds and water courses in that area and I reckon gold could be found, in some quantity.
    When I was out there rabbiting, if I was camped near a water course,
    I would sometimes do a bit of digging on the bends, in my spare time,
    looking for soakes and would often find traces of the mineral.
    I often thought that I would like to come back and have a good look.
    Times just about arrived. I dont have gold fever and finding it is not
    important but it would be a good area to spend a month or so away from
    the towns and people.

  10. #30
    JDNSW's Avatar
    JDNSW is online now RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,521
    Total Downloaded
    0
    Quote Originally Posted by olbod View Post
    ......

    I still wonder if 110 or 130 split rims will fit an early Disco.
    Nobody has said they wont and unfortunately I dont know anyone up
    here that has either vehicle that I could use too check. For all I know, toyota split rims might fit ?
    .....
    110 or 130 split rim wheels would probably fit - if they existed! As far as I know they have never been an option on any coil spring Landrovers.

    Split wheels were an option on Series 1 and possibly Series 2, and these may even fit early Discos, as the wheel stud pattern is the same, but they very rare and I think only came in a rather narrow size, and probably only rated for short wheelbase Series Landrovers.

    Toyota split rims do not fit - neither does anything else - Landrover stud pattern (same from first Landrover to current Defender, including Disco 1 but not 2) is not shared by any other manufacturer.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol

Page 3 of 5 FirstFirst 12345 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!