Thread: Waeco wiring question

Presuming you a talking about a WAECO fridge ?

Not sure what "wiring harness" you are talking about. The standard Waeco lead comes with a cig lighter / heavy duty combo plug at the end.

They do make a heavy duty wiring accessory kit ( RAPS12R-U2) which you wire direct to the car battery - is that what you are referring to ?

I helped someone wire one of those up in a Prado on the weekend - it was very simple - the crimp terminals provided were OK for attaching to the bolts on the battery terminals.

We need a bit more info.

Yes the wiring kit, you can pull the eyelets off and fit larger ones!

Sorry a Fridge and yes the RAPS12R-U2, i have installed, but the round ends will not fit my battery??

As T2 said if you are connecting the wires to the battery and the holes in the supplied eyelet crimps don't fit your battery then get ones that do. Although if they nearly fit you could ream the eyelets out a little bit.

There might be other places to connect it depending on what the vehicle is but the best place is straight to the battery.

Originally Posted by juddy

Sorry a Fridge and yes the RAPS12R-U2, i have installed, but the round ends will not fit my battery??

Sorry I deleted my post after Tombie replied as I though I was way off track. (post now reinstated)

The RAPS12R I fitted on the weekend came with two round lug terminals that fitted OK over the tightening bolts on the battery terminals - in fact they were a bit big. These terminals were loose in the kit, not already crimped to the cable. Anyway as said - if the're not the right size just go to Repco or somewhere and get some bigger ones.

Little hint - you'll find it a bit easier if you're feeding the cable through the firewall, if you cut the fuse off and refit it later.