Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: PROVENT ELEMENTS - need to start getting them back please.

  1. #1
    Join Date
    Aug 2006
    Location
    WA
    Posts
    13,786
    Total Downloaded
    0

    PROVENT ELEMENTS - need to start getting them back please.

    Hi All,

    I will send out PM's soon, but thought I would post up a general announcement as well.

    I need to start getting the provent elements back. If you have had it fitted to your vehicle for any length of time, could you please remove it, complete the data sheet, and post it back to me.

    No big deal if you are nowhere near the km's on your data sheet.

    You will need to seal the element well inside several sturdy plastic bags.

    THANKS IN ADVANCE!!! PM me if you need the address.

  2. #2
    Join Date
    Jan 1970
    Location
    Padstow NSW
    Posts
    4,501
    Total Downloaded
    0
    no worries! im only 5000-6000k into my 10000k limit. i need to dump oil soon so i can re seal my sump plug!

    cheers phil

  3. #3
    mcrover Guest
    Quote Originally Posted by discowhite View Post
    no worries! im only 5000-6000k into my 10000k limit. i need to dump oil soon so i can re seal my sump plug!

    cheers phil
    Im nearly a bit over 10k and Im in the same boat, leaking sump plug lol.

    No worries Ben, it's on it's way

  4. #4
    Join Date
    Aug 2006
    Location
    WA
    Posts
    13,786
    Total Downloaded
    0
    Thanks guys!

    Quote Originally Posted by discowhite View Post
    no worries! im only 5000-6000k into my 10000k limit. i need to dump oil soon so i can re seal my sump plug!

    cheers phil
    Only a 5 second job to swap elements - no need to drain the oil!!!

  5. #5
    Join Date
    Jan 1970
    Location
    Moruya Heads/Sth. Coast, NSW
    Posts
    6,532
    Total Downloaded
    0
    Do you have any of the "Trial" Provents left, my son's 300TDi Disco is a bit oily, if not do you know where I can buy one and approx. cost, Thanks, Regards Frank.

  6. #6
    Join Date
    Aug 2006
    Location
    WA
    Posts
    13,786
    Total Downloaded
    0
    Quote Originally Posted by Tank View Post
    Do you have any of the "Trial" Provents left, my son's 300TDi Disco is a bit oily, if not do you know where I can buy one and approx. cost, Thanks, Regards Frank.
    PM me with how many km he does and I will see what I can do. I may still have one somewhere from someone who was forced to pull out.

    Otherwise, MANN+HUMMEL head office in sydney can let you know where your nearest retailer is. I have absolutely nothing to do with selling them, but people have told me they are around $200 for the housing and $50 for the element (though the elements should have a LONG lifespan).

  7. #7
    Join Date
    Jan 1970
    Location
    Down the road from Sydney
    Posts
    14,702
    Total Downloaded
    0
    Quote Originally Posted by isuzurover View Post
    PM me with how many km he does and I will see what I can do. I may still have one somewhere from someone who was forced to pull out.

    Otherwise, MANN+HUMMEL head office in sydney can let you know where your nearest retailer is. I have absolutely nothing to do with selling them, but people have told me they are around $200 for the housing and $50
    for the element (though the elements should have a LONG lifespan).
    Thats really good to know as our 200tdi has always breathed REALLY heavy....So will probably be a good unit to fit
    Our Land Rover does not leak oil! it just marks its territory.......




  8. #8
    Join Date
    Jan 1970
    Location
    Padstow NSW
    Posts
    4,501
    Total Downloaded
    0
    Quote Originally Posted by isuzurover View Post
    Thanks guys!



    Only a 5 second job to swap elements - no need to drain the oil!!!
    there is when there i have an endless supply of new oil and did i mention the leaking sump plug? dunno how to make the oil stay in there while thats unscrewed?

    cheers phil

  9. #9
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    No problems Ben
    I will get onto it.
    Please send the address.
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post

  10. #10
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,503
    Total Downloaded
    0
    Quote Originally Posted by discowhite View Post
    there is when there i have an endless supply of new oil and did i mention the leaking sump plug? dunno how to make the oil stay in there while thats unscrewed?

    cheers phil
    roll the car onto the roof.....


    and my filters not going to be any use to you... I took the element out while I was naffing around setting it up and forgot to put the bloody thing back in.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!