Thread: Skulls blocking radiator air flow??

Originally Posted by cooper

Well mate,as with Mr's double 'aitch,Iv'e got heaps to do tomorrow,so i will bid you 'bon nuit',Same place tomorrow,no doubt.
Cheers N/C/A.

BFN

yeh tell me about it



Mrs ho har

You wanna hear about pain? My rear diff recently decided bearings were uselsee and spat the lot. So i pulled it out, did the bearings and had the diff lock airline bronzed cause it had a little hole in it. So far so good. Put the diff back in blah blah blah....diff lock didn't work. pulled the diff out again to discover i had pinched the airline between the diff and housing. Got a new one. Put diff back together. Diff lock didnt work. The new piece i bought from arb was blocked with solder. They told me i would have to wait a week for new ones to come in. I batted my eyelids and showed some leg (quite a scary thought seeing how im a 37 year old bloke with very hairy legs) and they repaired my original one. somthing they said they just don't do. Learnt my lesson. Put diff lock together tested BEFORE i put it back in the housing. The upside of all this? I can now pull a diff center out in less than 30 mins. I still smell like diff oil and silicone.

From one blonde to another, what do you mean they're sinking?

Originally Posted by Numpty's Missus

Help!! The bovines are sinking

Well at least you've accomplished something ... I've been supervised & still get into all sorts of problems, like spending hours trying to put the radiator back the wrong way. Why the hell would they put it under the thingy, it's much easier if it rests on the thingy & you can bolt it up a treat ... Tony finds it incredibly frustrating watching me ... & usually ends up rectifying my mishaps!

Originally Posted by Mudsloth

You wanna hear about pain? My rear diff recently decided bearings were uselsee and spat the lot. So i pulled it out, did the bearings and had the diff lock airline bronzed cause it had a little hole in it. So far so good. Put the diff back in blah blah blah....diff lock didn't work. pulled the diff out again to discover i had pinched the airline between the diff and housing. Got a new one. Put diff back together. Diff lock didnt work. The new piece i bought from arb was blocked with solder. They told me i would have to wait a week for new ones to come in. I batted my eyelids and showed some leg (quite a scary thought seeing how im a 37 year old bloke with very hairy legs) and they repaired my original one. somthing they said they just don't do. Learnt my lesson. Put diff lock together tested BEFORE i put it back in the housing. The upside of all this? I can now pull a diff center out in less than 30 mins. I still smell like diff oil and silicone.

Huh? Translate for me woman! It's been a lonnnnnnnnnnnng day

Originally Posted by Numpty's Missus

The ship is going down.........................

Originally Posted by Numpty's Missus

Help!! The bovines are sinking

Is grey close to blonde?

I think at my house tonight, www stands for weal wonky web the rain seems to have disolved a couple of my wers. I've put my dongle on a lead and tried it all over the house.