Thread: Valve for front light washers?

Originally Posted by Matman

Ive got a problem with the black joiner valve thingy

which joins up the front hoses for the front light washers on my D2.Its the one that comes of the washer bottle and has a three way joiner valve in it.Its not working,water wont go through it when i unplug it and hit the switch.Is there anyway of fixing it?Can i pull it apart?Or just buy a new one?

Cheers Mat.

That's not man speak that's girls speak...... that is how I would describe something

Matman

The three way black tube is a one way valve from the washer bottle pipe into the two light washer tubes (looks like an exaggerated "Y")

costs about $8 - $15 if memory serves and easy peasy fitment. (mine would let the left hand washer "weep" constantly)



For DB and the girls:
The black joiner valve thingy connects the tubey straw thingys to the spray mist emitting jobbie. This sprays the wet soapy liquid stuff onto the glass fronted make road brighter units on the front of the car

Cheers
Jason

Originally Posted by jason7001

Matman

The three way black tube is a one way valve from the washer bottle pipe into the two light washer tubes (looks like an exaggerated "Y")

costs about $8 - $15 if memory serves and easy peasy fitment. (mine would let the left hand washer "weep" constantly)



For DB and the girls:
The black joiner valve thingy connects the tubey straw thingys to the spray mist emitting jobbie. This sprays the wet soapy liquid stuff onto the glass fronted make road brighter units on the front of the car

Cheers
Jason

Thanks jason so i could get one from a hardware then?

Thanks jason so i could get one from a hardware then?

No mate, its a LR part. If you draw a blank PM me and I'll chase up a part number but it should be an over the counter item

Cheers
Jason