Results 1 to 5 of 5

Thread: which ratio do i have?

  1. #1
    Join Date
    Jan 1970
    Location
    Mandurah, WA
    Posts
    460
    Total Downloaded
    0

    which ratio do i have?

    which ratio do i have?

    Can anyone out there help me please.

    i own 05 LR defender 110 wagon. i presume i have the 1.4 ratio in my transfer case. the rave cd in the transfer section (defender manual)says the LT230SE has a ratio of 1.211:1.

    I do 2500rpm at 100km/h, is this normal

    I ask as my car is away, i supose the owners manual would tell me.

    Any advice would help
    cheers geck

  2. #2
    Join Date
    Jan 1970
    Location
    TOWNSVILLE
    Posts
    428
    Total Downloaded
    0
    You can ask www.ashcroft-transmissions.co.uk

    They will want the VIN and Number off the Transfer Case (it is there, they can offer a pictorial to show where it is). Persons helping me with mine were astounded that the ratios could be tracked to the particular vehicle.

    Why do you ask though?

    If you want more power you can go to Mackay and Chip, this will help but not change the ratio. If you want to lower the revs at any given speed then the above link can help.

    I drove a TD5 on the last desert trip, chipped, nitro shocks, lockers (not relevent to the trip as I run open diffs most of the time). A 130 and compared to my Tdi was exceptional.

    Regards,
    PeterW

  3. #3
    Join Date
    Jan 1970
    Location
    TOWNSVILLE
    Posts
    428
    Total Downloaded
    0
    By the way mine used to be 2840 RPM at 104Km 65Mph.

    Regards,
    PeterW

  4. #4
    Join Date
    Oct 2006
    Location
    Wallumatta, NSW
    Posts
    829
    Total Downloaded
    0
    G'day.

    I'd say it's the 1.41 ratio as 2500rpm would be about right for 100kph with that. If it were the 1.222 instead, then I'd expect the rpm for 100kph to be closer to 2200rpm.


    Geoff

  5. #5
    Join Date
    Jan 1970
    Location
    Mandurah, WA
    Posts
    460
    Total Downloaded
    0
    thanks to both of you.....

    I have bought the 1.211 gears made by ashcroft, for the reduction in high range... Then i was looking at the workshop manual and i saw they had written LT230SE has 1.211. I always thought I had the 1.4, I just wanted to check, incase i had spent money and had already had the ratios. That would have been a big bummer!

    When i get my car back i will check with ashcroft with my VIN.

    Thanks again
    geck

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!