Thread: Discovery 4 and a Sound n Sound baby seat

Australian delivered cars have a bracket on the back of the middle row of seats which connect via strap to the top strap on the baby seat. The seat belt then wraps around & thru the base of the baby seat to fix the bottom of the baby seat.

Be careful of compatibility as I believe the european cars us an iso fix system which is different to the standard required in Australia.

The system in Australia will be the same for the other cars you mentioned.

You should be able to go to the Safe n Sound Australian website for advice.

Regards

Chuck

Hope this helps.

Thanks Chuck,

We've bough the Disco 4 in OZ, so hoping it has the aussie standards in built.

Yes over here they use ISOFIX and its completely different. So i dont think my setup from here will work in the aussie car.

Now just need to find out what strap length i need.

Thanks,


Veronika

Originally Posted by chuck

Australian delivered cars have a bracket on the back of the middle row of seats which connect via strap to the top strap on the baby seat. The seat belt then wraps around & thru the base of the baby seat to fix the bottom of the baby seat.

Be careful of compatibility as I believe the european cars us an iso fix system which is different to the standard required in Australia.

The system in Australia will be the same for the other cars you mentioned.

You should be able to go to the Safe n Sound Australian website for advice.

Regards

Chuck

Hope this helps.

I recently fitted a baby seat for my grand daughter in my new D3 - both Australian - straps supplied with baby seat were adjustable & easily long enough.

Regards

Chuck

You shouldn't need an extension strap unless the anchor point is right at the back of the car. The anchor straps on Safe and Sound car seats are usually several feet long.