
 Originally Posted by 
Aussie
					 
				 
				So in effect you could scan the map I had on the weekend and then import that into the Laptop and use that?
			
		 
	 
 Just beware - some of these maps are not real accurate as far as lat and longs go.  
I use scanned in maps on my system and proper topo maps or properly produced maps are fine.  However I also use scanned in maps from touring atlases and some of the features are not correctly gridded in to lats and longs - they are designed for use in the car and you only need to know that you are on the correct road and need to turn at the next road etc - in using them if the geographical position is not quite correct it doesn't matter - but it does if using them with a GPS.  
Recently when travelling from Canberra to Newcastle I was using maps scanned in from a touring atlas.  More often than not I was not on the road but sometimes there was no issue.  I intially thought I had calibrated the map incorrectly but recalibrated them as I travelled - It became clear after a while the maps were incorrect with respect to to lats and longs.  
All topo maps I have scanned in have been spot on.
But overall scanned in maps work well - just calibrate them properly.
Gazzz
				
			 
			
		 
			
				
			
			
				REMLR 243
2007 Range Rover Sport TDV6
1977 FC 101 
1976 Jaguar XJ12C
1973 Haflinger AP700
1971 Jaguar V12 E-Type Series 3 Roadster
1957 Series 1 88"
1957 Series 1 88" Station Wagon
			
			
		 
	
Bookmarks