Holden Red Conversion

Hi Guys
Thanks for the info and will look into, much appreciated

regards Bruce.

Quote:

---

Originally Posted by Brian Hjelm

A full rebuild, a more suitable cam grind, high volume oil pump, the correct sump and baffles for the job. Attend to the carburettor with a float bowl packer, pressure regulator, return line.

---

High volume oil pump, I may have one of those but how can I be sure it is high volume by looking at it?
.

Quote:

---

Originally Posted by wrinklearthur

High volume oil pump, I may have one of those but how can I be sure it is high volume by looking at it?
.

---

It is physically deeper than a standard unit and uses longer bolts to hold it on. If you have a standard one as well, you will soon notice the difference. Or post a pic, should be able to tell from that.

Quote:

---

Originally Posted by bacicat

If you end up with a choice between a 186 and a 202, go for the 186 - it is better suited to the series vehicle, and IMO was a better and smoother engine than the 202.

---

Would a 202 with it's longer stroke be a better choice with 3.54 diffs or an overdrive (or both) as the engine revs would be lower and the 202 should have more torque?


Cheers, Mick.

In that scenario, then probably yes, the 202 would be a better option. If it were to have standard diff ratios, then the 186 is a freer revving engine and would suit better.

Quote:

---

Originally Posted by bacicat

In that scenario, then probably yes, the 202 would be a better option. If it were to have standard diff ratios, then the 186 is a freer revving engine and would suit better.

---

Ummmm, 202's in GTR Toranas were revving freely to over 7000rpm in race engines and for 500 miles at Bathurst.

Quote:

---

Originally Posted by Brian Hjelm

Ummmm, 202's in GTR Toranas were revving freely to over 7000rpm in race engines and for 500 miles at Bathurst.

---

I understand that and didn't say that a 202 won't rev, but a 186 has less revolving mass and spins up quicker - a freer revving engine, not a higher revving engine.:)

Looking at getting a 186 to replace the dodgy 202 I got for free cause it's gonna cost me too much to repair but it would still run just needs some money and time. The 186 seems to get a better wrap from everyone in a Landy than the 202 just cause the 186 is a more freely revving motor. Cause I wanna chase foxes and tear around the farm the easier revving motor would suit better and I should be able to extract enough grunt out of it to get the big beast up to speed quick, my rear tyres aren't gonna like me but they won't have a choice being on gravel with a bit extra power:D Just need someone whose willing to trade a rough 202 for a reasonable 186, shouldn't be too hard

I've got a 173 you can have cheap, - but you'll have to take the rest of the series III it's attached to as well...

Thanks for the offer, not really looking for a 173 or a whole series 3 to go with, I've put the 202 up for swaps to see if any of the speedway boys will pick it up and maybe have a 186 to trade.