Thread: RWC for Series 1 with 186

Anyone know the part number for this shock bush? I can’t seem to find similar bush on the net. Thanks.

Not polyurethane but rubber.

Shock absorber bush - cone type - Paddock Spares


Colin

I think the nail holding the bush in is more of a RWC issue than the bush itself, Supposed to be held in with a big split pin.

Looks like a split pin to me. Thats looking at it on my phone. Pin is horizontal.

Looks like a split pin to me too - mind youI have seen plenty with nails, and possibly more common, fencing wire!

Fourteen8,
How did you get on regarding a RWC?

Cheers, Mick.

Originally Posted by goingbush

I think the nail holding the bush in is more of a RWC issue than the bush itself, Supposed to be held in with a big split pin.

The shocks move so need to replace the bushes. I am getting the rubber one from north melbourne. Will fit them tonight if not too hot in garage and see.

Originally Posted by mick88

Fourteen8,
How did you get on regarding a RWC?

Cheers, Mick.

I got a mechanic came a couple days ago that can send to garage for rwc. He was quite surprise how good the condition of the car (good sign). But there few things need to clean and bushes to replace.

Showed him the PPSR showing it has been registered before and also VSI21 for seat belts rule in Victoria. But I didn’t mentioned about the holden engine in it

Will send it to him this Sunday for Monday appointment at the garage. I hope the mechanic can talk/persuade the rwc garage better than me.
Will update how does it go on Monday.
I just want to enjoy and drive it every weekends to take children to sports/lessons.

Thanks
Gus