
 Originally Posted by 
DiscoWeb
					
				 
				Today I was out playing around Tom Groggin on the NSW/Vic border, drove up to Davies High Plain Hut and then on to Mt Pinnibar.
 
Whilst the drive up to Pinnibar is pretty steep in parts I was suprised to see transmission fault message come up near the the top. I stopped and the message centre said "transmission fault limited gears available" or something like this.
 
I felt it was probably due to being a bit hot, so I let it sit for a while and then continued the last 3 -4 km up to the summit, by the time I got there I got the fault warning again about 100m from the summit.
 
I could hear it whinning and clicking when I stopped so let it cool for a good 45 min before attempting the steep decent.
 
No messages on the way down but I did nurse it out, using HDC instead of first low for speed control on the very steep bits back down and coasting in neutral where ever possible.
 
Question is, do I need this seen to ASAP or was it simply a case of overheating? 
 
Also is this a common problem experienced by other.
 
Regards,
 
George
TDV6 SE 2008
			
		 
	
Bookmarks