Thread: Something isn't right after Q093

Originally Posted by Disomania

The problem was they put the hose from the turbo to the engine on in the wrong order. You MUST put the turbo end on first THEN the engine or the airflow is impeded

Interesting how often have you heard about that happening?

I was in a mood and couldn't help myself. I guess it's along the lines of the left handed screwdriver thing.

I've been thinking about what might cause the issue Mowog mentioned after the computer update, and honestly can't think of anything it might be. If it was a missing hose, it would probably not have run at all given the sensors on vehicles these days or popped up an engine fault light. It may have needed a master reboot to settle things - as I said earlier, I've had strange things with adding bits/software to computers where a reload of the software was needed, and have had reboots do nothing where a shutdown/wait a few minutes/turn on have worked a treat.

On another note, I've got the D4 in to have a couple of things looked at: A loud rattle in the rear that COULD be the blanking panel I have instead of the 3rd row of seats (D4 2.7 with no need for the extra's), a systems check as I've had a 'gearbox fault' twice (only an orange triangle that goes away with a stop/start of the engine) and a broken seat height adjuster (delivered that way, just waited to take it back). Here's hoping I don't need too much done, but they are giving me a loaner Freelander2 for the day which is nice.