-
17th June 2010, 02:52 PM
#1
D3 trailer plug wiring
Hi Guys
hitched up the new c/van @ the dealers to the D3, last saturday & found that the D3 wiring does not have a power wire connected so I can run the 3 way fridge whilst driving.
D3 purchased 09/2009, was the last one & a dealer demo
on testing the D3's 7 pins, found only 5 were connected. L & R blinkers, stop, park & hopefully an earth. ??
there is another set of 7 pins/socket on the other side of the hitch, (white socket cover)this has 2 power connections. 1 constant & 1 when the ignition is one.
does anyone else have this problem or has this, black socket been retrofitted/altered when the D3's arrive in Aust. ??
so is the best way to get power to the black socket to put a jump wire from the white socket(not the constant pin) to the appropriate pin in the black socket. ????
appreciate yr advice.
cheers Tom
-
17th June 2010, 08:32 PM
#2
Tom,
There is a way, but need to know what current the fridge is drawing.
If u let me know i will take a photo of how to swap 2 pins to get constant voltage to the fridge at pin no.2 which is normally the aux wire.
There is an Earth & is located on pin no.3
Cheers
-
18th June 2010, 03:12 PM
#3
Hi Pete
thanks for the reply. there is noting in the book which states the draw for
the 3 way fridge. it is a Dometic RM2350.
but I did google it & it states 10.5amps
does this help
cheers Tom
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks