Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 27

Thread: Odometer inaccuracy

  1. #11
    Join Date
    Jan 1970
    Location
    Perth
    Posts
    2,248
    Total Downloaded
    0
    Quote Originally Posted by mowog View Post
    The code wont work for me. I can get the screen for the pin but it does nothing?

    Are there any other codes?
    There are two "hidden" screens - which one are you accessing?

    Cheers,

    Gordon

  2. #12
    Join Date
    Jan 1970
    Location
    Perth
    Posts
    2,248
    Total Downloaded
    0
    Quote Originally Posted by DanW View Post
    Really? I've always found Google Maps to be pretty inaccurate themselves. Not just on actual road routes but on distances as well. whereis.com seems a bit better but they also seem not to be able to keep up with infrastructure changes making the actual distance different from that indicated on the website.
    Google maps should be pretty accurate on established routes. For instance, it logs Perth CBD to Kalgoorlie as 594km. So does Travel Around Australia (which uses Whereis), and the WA traveller's portal list it as 596km.

    Not much difference between them. So if you specify exact start and end points (eg an intersection) on established roads, I'd be confident that the distance reported would be more accurate than the average car's odometer.

    I guess it depends what you're using as a reference to gauge the various GPS/mapping providers' accuracies? Short of getting a survey map and a good digital map wheel, what standard do you use to determine the accuracy of Whereis vs Google?

    Cheers,

    Gordon

  3. #13
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0
    Quote Originally Posted by Colin Pedersen View Post
    ..This explains why cursing at 119 on the Highway the radar guys wave at me...
    They were trying to get you to stop cursing at 119 kph!
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

  4. #14
    Join Date
    Oct 2009
    Location
    Gladstone
    Posts
    1,086
    Total Downloaded
    0
    Quote Originally Posted by gghaggis View Post
    There are two "hidden" screens - which one are you accessing?

    Cheers,

    Gordon
    I am trying to access the GPS screen as discussed above.

    Would good to know what the other screen is and its pin.

  5. #15
    Join Date
    Jan 1970
    Location
    Sydney, NSW (nr Epping)
    Posts
    1,439
    Total Downloaded
    0
    Quote Originally Posted by DanW View Post
    SNIP I read "Wheels" regularly and they use "Actual speed at 100km/hr..." as a test point and nearly all of them are actually 96 or 97km/hr
    Hi Dan,
    That actually means that the speedo is reading high, as you would expect.

    What it is saying is that for a speed of 100km/h indicated on the speedo, the actual speeds were 96 or 97km/h.

    Best Wishes,
    Peter

  6. #16
    Join Date
    Dec 2009
    Location
    Albany, Western Australia
    Posts
    196
    Total Downloaded
    0
    Quote Originally Posted by gghaggis View Post
    Hi Jesse,

    If you have a separate GPS unit, measure against that on a long straight level road. Or calc a travel distance using Google Maps and drive it.

    Cheers,

    Gordon
    Will do - when I get back from the east. But I repeat - this is a WELL known highway (to me at least) - I've driven it hundreds of times in the last 40 years, and know the distance markers that I used to be pretty accurate, so don't expect much to change. However, will run this cross-check in 10 days when I return.

    Also - for all those kind folk who have noted that almost all cars nowadays have speedos that read above real speeds - thanks, but my interest is in distance traveled, not speeds. And no - I'm not complaining! - it's just good to know the real situation, and I wondered if my D4 is "unique" in this behaviour.

  7. #17
    Join Date
    Jan 1970
    Location
    Perth
    Posts
    2,248
    Total Downloaded
    0
    Quote Originally Posted by Jesse B View Post
    And no - I'm not complaining! - it's just good to know the real situation, and I wondered if my D4 is "unique" in this behaviour.
    Hmm - now you've got me intrigued - I might have to try a test run myself!

    Cheers,

    Gordon

  8. #18
    Join Date
    Jul 2006
    Location
    Tumbi Umbi, Central Coast, NSW
    Posts
    5,768
    Total Downloaded
    0
    Quote Originally Posted by Jesse B View Post
    ..... ..... .....

    I wondered if my D4 is "unique" in this behaviour.
    No, my 1973 Series III LWB did the same thing. It read 100 km for 107 km actually travelled when the retreads were new and 106 km travelled when they were worn.

    However that was almost certainly because I think it had the speedo from a SWB fitted, so it was calibrated for 650 or 700x16 tyres, not 750x16 and so both the speedometer and odometer were out. At an indicated 90kph, I was actually doing 100kph.

    That doesn't have much to do with your situation. It just amuses me that the latest Land Rover isn't much better than my old Series III, which I always suspected was built up from odd bits, especially as when I bought it in 1983, the motor was from an early 60's Land Rover.

    1973 Series III LWB 1983 - 2006
    1998 300 Tdi Defender Trayback 2006 - often fitted with a Trayon slide-on camper.

  9. #19
    Join Date
    Aug 2006
    Location
    WA
    Posts
    13,786
    Total Downloaded
    0
    Quote Originally Posted by vnx205 View Post
    No, my 1973 Series III LWB did the same thing. It read 100 km for 107 km actually travelled when the retreads were new and 106 km travelled when they were worn.

    However that was almost certainly because I think it had the speedo from a SWB fitted, so it was calibrated for 650 or 700x16 tyres, not 750x16 and so both the speedometer and odometer were out. At an indicated 90kph, I was actually doing 100kph.

    That doesn't have much to do with your situation. It just amuses me that the latest Land Rover isn't much better than my old Series III, which I always suspected was built up from odd bits, especially as when I bought it in 1983, the motor was from an early 60's Land Rover.
    In series vehicles (and others with mechanical speedo drives), the ODO reading is directly related to the speedo reading - as they are both driven by the same cable. IME 110/defender speedos under-read on standard tyres but are spot on if you fit 33's.

    The D3/4/RR(?) is a different kettle of fish. As it has an inbuilt GPS(?) and a billion sensors there is not necessarily a correlation between the speedo reading and the ODO reading (though there could be?). Jesse - I assume you have standard wheels? (sorry if you have mentioned and I missed it). Maybe this is yet another software glitch???

  10. #20
    Join Date
    Jan 1970
    Location
    Perth
    Posts
    2,248
    Total Downloaded
    0
    Quote Originally Posted by isuzurover View Post
    I assume you have standard wheels? (sorry if you have mentioned and I missed it). Maybe this is yet another software glitch???
    Jesse - not quite a "glitch", but that reminds me - have you re-calibrated the SatNav (there's a function in the Nav setup). You need a decent straight road to get it spot on. I think this would also reset the trip computers.

    Cheers,

    Gordon

Page 2 of 3 FirstFirst 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!