Thread: Cargo Barriers For D3

I recently fitted a Hayman Reece barrier and it is well finished and wasn't difficult to fit. The instructions supplied are OK and include templates but the templates for the plastic trim weren't great, I could have just used the moulded marks in the back of the trim and got a better fit.
I also modified the lower mounts so that the fit with the standard tie-down points was neater.

Last Sunday at Wandin I had a look at the barrier from Fourby Fitouts in Hallam, this is probably better than the HR unit in that it isn't offset so much in the top section and so gives a more room in the rear. Has the advantage of also allowing you to 'plug & play' some of their other shelving etc.

The custom setup is actually want I wanted in the first place, just the upper barrier.

Not real keen on your fire extinguisher position though...
I mount mine as low as possible just in case they do get loose.