Thread: Caravan Connectors at Rear of a D3

Yes, blinker won't pulse without shunt, but still needs resistance(shunt), to activate tow stability, cut the rear sensors , and stop you from going to offroad height thru TR
And maybe to make trailer indicator on dash work, (cannt remember that bit for sure)


Cheers Ken

so it's half fixed - at least you then only need the resistor, lot simpler than what’s needed for D3 ect

Originally Posted by CaverD3

D4 has led lights and no resistor so I think it works with LED trailer lights. Anyone know for sure?

Just ducked downtown and bought an adapter from Supercheap ($19.98 ) . Plugged into the D4 and my trailer - all works well. Trailer has LED lights.

Originally Posted by wazza7

Just ducked downtown and bought an adapter from Supercheap ($19.98 ) . Plugged into the D4 and my trailer - all works well. Trailer has LED lights.

Did you get the 7 pin round to say a 7 pin flat adaptor?
That's what I got for my D4 (~$20 from Supercheap) but it still didn't result in activating tow stability, nor did it cut the rear sensors or stop you from going to offroad height thru TR.
The trailer indicator on dash would only work on the first 'blink', then nothing thereafter.
I suggest checking that the trailer indicator on the dash activates with each & every blink of the LED trailer indicators when using your Supercheap plug adaptor. If it does, please provice more details of exactly what you have got from Supercheap, perhaps even a part number or post a photo.

This has nothing to do with the Supercheap adapater - is just some wires with a connector at either end.

If you are are having troubles it is in either the trailer or the tow vehicle.

Originally Posted by wazza7

Just ducked downtown and bought an adapter from Supercheap ($19.98 ) . Plugged into the D4 and my trailer - all works well. Trailer has LED lights.

Did you put it into "rock crawl" and see if it went to offroad height by itself,the screen should tell you trailer attached and height not selected.
If it goes to off road height auto, it does not know trailer is there, so no tow aids. (my aug\2009 built D4 3lt needed shunt)
Cheers Ken

Originally Posted by Duck's Guts

Did you get the 7 pin round to say a 7 pin flat adaptor?
That's what I got for my D4 (~$20 from Supercheap) but it still didn't result in activating tow stability, nor did it cut the rear sensors or stop you from going to offroad height thru TR.
The trailer indicator on dash would only work on the first 'blink', then nothing thereafter.
I suggest checking that the trailer indicator on the dash activates with each & every blink of the LED trailer indicators when using your Supercheap plug adaptor. If it does, please provice more details of exactly what you have got from Supercheap, perhaps even a part number or post a photo.

Apologies - missed the gist of the thread. I haven't got tow assist - my D4 is very basic - e diff only factory option. The plug adapter I bought from Supercheap is just a basic 7 pin round to 7 pin flat - all trailer lights operate and I don't have any indications on dash. Cheers Warren

Wazza,
I'm pretty sure that all D4s have "tow assist"...