Results 1 to 6 of 6

Thread: D4 Air Filter water Drain?

  1. 3rd January 2012, 06:31 PM #1
    RoverLander
    RoverLander is offline Master Subscriber
    Join Date
    May 2010
    Location
    Southern Sydney
    Posts
    226
    Total Downloaded
    0

    D4 Air Filter water Drain?

    I was cleaning out the air filter this afternoon. I noticed a bit of dust in the small box at the front of the air filter box. There is also a drain plug/hole there. I cleaned out as much of the collected bugs and dust as I could reach. Then I was wondering if the drain was working ok. So i thought I'd pour some water into the bottom of the filter box to test it. The water didn't go anywhere... just sat there. I ended up using a towel to dry out the filter box.

    I have a safari snorkel fitted so now I'm concerned that if water does get down it the air filter box it will build up. I read a post somewhere on this forum that someone had this happen to them.

    Does anyone know anything about the drain hole? Does it clog up easily? Should the water drain out easily? Do I need to make a modification?

    This is on a MY10 D4 3.0TD6 Diesel.
    Reply With Quote Reply With Quote
  2. 3rd January 2012, 09:37 PM #2
    CaverD3
    CaverD3 is offline ChatterBox
    Join Date
    Mar 2008
    Location
    Sydney, Australia
    Posts
    2,351
    Total Downloaded
    0
    Air box should have a one way valve in it. But it may have been filled to make it water tight when snorkel was fitted.
    Reply With Quote Reply With Quote
  3. 4th January 2012, 03:21 PM #3
    PaulGOz's Avatar
    PaulGOz
    PaulGOz is offline Master
    Join Date
    Aug 2010
    Location
    Sydney
    Posts
    128
    Total Downloaded
    0
    I have been tinking about the same thing with all the rain we have been having lately and the recent snorkel install. I have been a bit lazy though and not got around to opening up the airbox to see if I have collected water.

    I have heard also that the one way valve may get sealed with snorkel install.
    Reply With Quote Reply With Quote
  4. 4th January 2012, 08:04 PM #4
    Graeme
    Graeme is offline Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,033
    Total Downloaded
    0
    When I fitted a snorkel to my D2, contrary to seemingly common practice I left the duckbill drain unsealed so that water could drain.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
  5. 4th January 2012, 09:37 PM #5
    CaverD3
    CaverD3 is offline ChatterBox
    Join Date
    Mar 2008
    Location
    Sydney, Australia
    Posts
    2,351
    Total Downloaded
    0
    Did the same with mine. I figure it will keep the water out as long as the engine is running.

    PS anyone else getting anoying pop ups? "Tech News"
    Reply With Quote Reply With Quote
  6. 5th January 2012, 08:01 PM #6
    RoverLander
    RoverLander is offline Master Subscriber
    Join Date
    May 2010
    Location
    Southern Sydney
    Posts
    226
    Total Downloaded
    0
    Thanks for the feedback. I hadn't considered that the snorkel installer may have blocked the drain. I would rather have left that part original. Given the amount of bugs that make their way down there i suspect they would block the drain anyway.

    I will have another look and unblock the drain.
    Reply With Quote Reply With Quote
« Fuel for V8 | Know your Fords? »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!