I have enquired before as to pricing to put the car on the computer - min charge is 1 hours labour - even if it takes 10 minutes.
Local independent is 30min labour charge but that is a fair way from me.
Garry
 ChatterBox
					
					
						ChatterBox
					
					
                                        
					
					
						Ask dealer before you assume the price. Some dealers do the whole lot themselves.
If you run at <20mm then it should set the TTM height at that height.
Also note that TTM is supposed to be set with a full tank.
I have enquired before as to pricing to put the car on the computer - min charge is 1 hours labour - even if it takes 10 minutes.
Local independent is 30min labour charge but that is a fair way from me.
Garry
REMLR 243
2007 Range Rover Sport TDV6
1977 FC 101
1976 Jaguar XJ12C
1973 Haflinger AP700
1971 Jaguar V12 E-Type Series 3 Roadster
1957 Series 1 88"
1957 Series 1 88" Station Wagon
My dealer southerns quoted 180 for a wheel alignment and balance.
TTM is free and I then see someone that is happy with a much lower fee. Bit of extra work for me, but I can then take the wife our for a fancy lunch on the savings.
Brett....
 ChatterBox
					
					
						ChatterBox
					
					
                                        
					
					
						Anyone with Autologic can do it if you have an unfriendly dealer.
Hi all,
Just had a wheel balance and alignment done by Camberwell Tyrepower.
Its the second time that Michael (boofdlt from this forum) has done it.
The tyres have worn evenly over the last 10,000Klm's and the vehicle tracks perfectly.
Thanks again Michael for your good work.
To hell with the TTM theory's.
Cheers, Happy Craig
 Swaggie
					
					
						Swaggie
					
					
						Hi Graeme,
I was advised that it was a good idea to have done regularly.
This aside, I was interested to see if the initial wheel alignment was a success.
Prior to taking my vehicle back to Camberwell Tyrepower, I had an independant tyre specialist check the tyre wear and they informed me that the tyres were wearing spot on.
Cheers, Craig
I've just had my D3 done by Camberwell Tyrepower - thanks very much Michael - rotation - balance - alignment... the whole box & dice...had to have the toe-in/castor bolts replaced on the front...they gave me a lift to MLR so I could pick up the required spare parts and then fitted it all up for me...great service and a job well done.
"boof" at work...

Sorry - I forgot to put in the pics of the bolts that had to be replaced ...

| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks