Page 3 of 3 FirstFirst 123
Results 21 to 24 of 24

Thread: Disco 4 self-levelling and towing caravan

  1. #21
    Brian Alcoe Guest
    Quote Originally Posted by robbotd5 View Post
    3.5T????. I hope that weight is ATM!!!!! Otherwise your overweight and illegal.
    Regards
    Robbo
    yes.... RobboTD5 .... the 3.5t ia all up, including water, clothes etc.

  2. #22
    Brian Alcoe Guest
    Quote Originally Posted by TDV6 View Post
    Brian how good are your shocks, mine are getting near replacement time and the car is a bit rollypoly on corners etc but we have 183k on the clock 60K + towing a 3 ton off road van (Kedron) so its only to be expected.

    Also are you using height adjusting rods etc (Lamis?).

    Mine is a Feb 05 manufacture TDV6 which we have had since new, bought to tow the van, have not regretted it. Also we have a Mitch hitch to keep the van level when towing.

    Enjoy,

    Ryall.
    Hi TDV6, yes as per my reply to Graeme the shocks have been replaced under warranty. Other caravaners that have followed me say the van sits on the road very well, it is only the car i am (seemingly) having trouble with. The caravan manufacturer (Otron) supplied n new ball and tongue which was 50mm or 100mm higher so the van would travel on the level.
    Briab

  3. #23
    Join Date
    Jun 2008
    Posts
    296
    Total Downloaded
    0
    G'day Brian,

    When I have difficult issues I talk to respected LR people who may not be a LR dealership but they know their stuff, also I talk to people from a LR club who like those on this forum have been there and done that but more importantly most would be close handy and willing to talk to you, show you their setup and how it performs.

    Hope this helps,

    Ryall.

  4. #24
    Brian Alcoe Guest
    Quote Originally Posted by TDV6 View Post
    G'day Brian,

    When I have difficult issues I talk to respected LR people who may not be a LR dealership but they know their stuff, also I talk to people from a LR club who like those on this forum have been there and done that but more importantly most would be close handy and willing to talk to you, show you their setup and how it performs.

    Hope this helps,

    Ryall.
    Thanks Ryall
    Do you know of the people you refer to that are SA based??
    brianalcoe@internode.on.net

Page 3 of 3 FirstFirst 123

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!