Page 3 of 3 FirstFirst 123
Results 21 to 25 of 25

Thread: D3 Strange noise from engine bay

  1. #21
    Join Date
    Feb 2012
    Location
    Beaudesert Qld
    Posts
    129
    Total Downloaded
    0
    Terry what you describe happening here with the noise becoming apparent under load etc is exactly as it occurs with our vehicle. I also had new timing belts done about 15000k ago but still got the noise.

  2. #22
    Join Date
    Feb 2012
    Location
    Beaudesert Qld
    Posts
    129
    Total Downloaded
    0
    Hi Nomad9,
    The serpentine belt was not replaced because it was still in good condition but as with your experience the noise disappeared & returned a couple of weeks later. I think I will do as you have done & get the belt replaced & re tensioned and see if that removes the 'cicada noise'. You mentioned 'no auto tensioner'. does the D3 normally come with one and you have removed it and gone to manually tensioning the belt? If so is it a better idea to manually tension the belt because of a serviceability issue with auto tensioners generally?

  3. #23
    Join Date
    Jul 2009
    Location
    Gold Coast
    Posts
    3,775
    Total Downloaded
    0
    Just had a call from the workshop that is fitting the bull bar and a few other goodies to the D3, I asked him to have a look for the noise.

    Time will tell if he has got it right when I get the Disco back tomorrow but he went right through it and found a lose exhaust heat shield that is just behind the passenger side front wheel which was vibrating. He has pop rivetted it back to its mount but has not had a chance to drive the car yet as it is still in pieces.

    Anyway thought it was worth a mention so others with the noise could have a quick check and see if their heat shields have come lose as well.

    cheers,
    Terry
    Cheers,
    Terry

    D1 V8 (Gone)
    D2a HSE V8 (Gone)
    D3 HSE TDV6 (Unfortunately Gone)
    D4 V8

  4. #24
    Join Date
    Jun 2010
    Location
    Middle Cove NSW Australia
    Posts
    83
    Total Downloaded
    0
    My 2005 D3 TDV6 makes a similar noise under these conditions, much more noticeable when driving on a freeway next to solid concrete walls.
    Not Engine related as I had a new engine 12 months ago.
    Unable to re-create noise when car is stationary.
    Dealer can't find anything

    Regards,
    Richard
    Last edited by rdenyer; 10th February 2013 at 12:29 PM. Reason: spelling

  5. #25
    Join Date
    Jul 2009
    Location
    Gold Coast
    Posts
    3,775
    Total Downloaded
    0
    At my last service I had two serpentine belt pulleys / tensioners replaced and the noise went 95% away for about 300 km or so, then it slowly came back and now bout 1,000 km later it is back to how it was.

    The belt was replaced 20,000 km ago by the way and the noise was there before and after it was replaced.


    cheers,
    Terry
    Cheers,
    Terry

    D1 V8 (Gone)
    D2a HSE V8 (Gone)
    D3 HSE TDV6 (Unfortunately Gone)
    D4 V8

Page 3 of 3 FirstFirst 123

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!