Reply With Quoteits 2.5 inches and it was found at the front of the vehicle or where it was parked at least. was driver side near front wheel. but the car wasnt there at the time as i noticed it on the floor. so it could be rear driveshaft clip?
Looking at the parts diagrams for the D3, it appears there's only UJs and circlips on the rear driveshaft:
Rear:
Front:
That might round down the places to search for you.
Fossicker
its 2.5 inches and it was found at the front of the vehicle or where it was parked at least. was driver side near front wheel. but the car wasnt there at the time as i noticed it on the floor. so it could be rear driveshaft clip?
Swaggie
2.5 inches is to big to be a UJ cir clip i would think,2.5 cm and it could be one.
If it was one,you would be dam lucky to find it at home in the garage.
Swaggie
Has any work been done on the vehicle in reent times?
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
Fossicker
Graeme
the only work done recently was a full trans flush and steel pan (i presume). other than that there was some brake light work. is it too big to be a UJ clip?
RoverLord
2.5 inches?
bout the only thing I can think of that has one of those that might remotely be able to fall out is ummm.....
let me get back to you....
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
Fossicker
thats 2.5 inches diameter not length!! but seriously, do you think it could be drive shaft or steering related BlkKnight?
Swaggie
I've not seen the kit so I wonder if the filter is retained with such a clip and this one went flying during fitment requiring another to be obtained. You could ask where the work was done if they recognise the clip.Originally Posted by lukesky7
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
Fossicker
it was done at graeme cooper - i trust the guys there as we have been there for a while now. was going to take it back to them as they seem to know their stuff. trouble is do i drive it there and risk any damage or get it towed there and get them to check it out...
Swaggie
Its far too big for a uni joint circlip from your vehicle. If its from the gearbox filter then its internal and can't fall out so either one hasn't been fitted or its a duplicate. I would keep driving but ring the workshop to discuss a possible source.
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks