Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: Elec Brake Controller install to D4 - Perth Area?

  1. 21st January 2013, 08:13 PM #1
    DiscoDavey's Avatar
    DiscoDavey
    DiscoDavey is offline Fossicker
    Join Date
    Sep 2012
    Location
    Northern Suburbs, Perth
    Posts
    50
    Total Downloaded
    0

    Question Elec Brake Controller install to D4 - Perth Area?

    Hello Perth People (and anyone else that can help),

    I am trying to find someone in Perth to install a Tekonsha P3 to my D4.
    I've spoken to a couple of auto electricians and clearly they have little idea regarding the technicalities of the D4, EBC and LED's on trailers. As documented in many threads including this one: D4 Electric Trailer Brakes

    Anyway, can anyone recommend a competent installer in Perth? Would be VERY handy if they were located in the Northern Suburbs.

    I'm towing three trailers, one near or slightly over 3t so I'm keen to get it done right!

    Finally, on a another matter, is anyone towing 2.5t - 3.5t on the standard LR hitch? Many people that are serious about their towing seem to use a Mitchell Bro Hitch but I am keen to hear from anyone that successfully tows at the 90km/hr limit using the standard hitch.

    Thank you all in advance.
    Reply With Quote Reply With Quote
  2. 21st January 2013, 09:47 PM #2
    MC D4's Avatar
    MC D4
    MC D4 is offline Fossicker
    Join Date
    Dec 2010
    Location
    Perth WA
    Posts
    30
    Total Downloaded
    0
    Hi DiscoDavey,

    I did my own EBC controller install used Redarc remote control unit and Sneigy's excellent DIY instructions. It was a relatively easy process. If you are not that way inclined then showing a decent auto sparky the steps would be the way to go. If you get stuck let me know and I will put you onto a guy I know in Bibra Lake that looks after our work vehicles. He ended up doing the diode for me nd we ran through the install as he was interested in the LR setup.

    In regards to towing with the std LR hitch I tow a 2.5 tonne toy hauler and with 3 bikes on board would push 3 tonne. Been doing this for 2 years and covered a lot of kms. Had no issues to date. Sit on 105kph most of the way.
    Reply With Quote Reply With Quote
  3. 21st January 2013, 10:05 PM #3
    LR D4's Avatar
    LR D4
    LR D4 is offline Master
    Join Date
    May 2009
    Location
    Mount Lawley
    Posts
    225
    Total Downloaded
    0
    Have a talk to lifestyle 4WD in Morley 4 Barnett Crt Morley WA 6062 (08) 9271 7500

    I talked to the owner about fitting this to my D4
    Reply With Quote Reply With Quote
  4. 22nd January 2013, 08:07 AM #4
    DiscoDavey's Avatar
    DiscoDavey
    DiscoDavey is offline Fossicker
    Join Date
    Sep 2012
    Location
    Northern Suburbs, Perth
    Posts
    50
    Total Downloaded
    0
    Thank you LR D4 and MC D4,
    I like the idea of DIY... I'll give that a go and if I get into trouble I'll give one of the above a call.

    MC D4 do you also use a Pulse Buster?

    Thanks again.
    Reply With Quote Reply With Quote
  5. 22nd January 2013, 09:26 AM #5
    sniegy's Avatar
    sniegy
    sniegy is offline ChatterBox
    Join Date
    Jan 1970
    Location
    Melbourne
    Posts
    2,622
    Total Downloaded
    0
    If you have any questions/queries just ask, happy to help. Shame you weren't closer!


    Cheers

    Sent from my iPad using Forum Runner
    Reply With Quote Reply With Quote
  6. 22nd January 2013, 09:57 AM #6
    DiscoDavey's Avatar
    DiscoDavey
    DiscoDavey is offline Fossicker
    Join Date
    Sep 2012
    Location
    Northern Suburbs, Perth
    Posts
    50
    Total Downloaded
    0
    Quote Originally Posted by sniegy View Post
    If you have any questions/queries just ask, happy to help. Shame you weren't closer!
    Thank you Sniegy. I suspect I will be asking a couple of questions.. Ordered P3 this morning so should be starting install next week.
    Reply With Quote Reply With Quote
  7. 22nd January 2013, 07:36 PM #7
    john_paul_128
    john_paul_128 is offline Fossicker
    Join Date
    May 2012
    Location
    Perth
    Posts
    24
    Total Downloaded
    0

    Elec Brake Controller install to D4 - Perth Area?

    Hi discoDavey

    I am near Joondalup and did DIY of RedArc following Sniegys instructions. I am happy to show you my install and lessons learnt!

    Let me know, John
    Reply With Quote Reply With Quote
  8. 22nd January 2013, 10:20 PM #8
    gotaflat's Avatar
    gotaflat
    gotaflat is offline Master Supporter
    Join Date
    Mar 2010
    Location
    back in WA
    Posts
    225
    Total Downloaded
    0
    I am keen to put mine in as well. I was thinking of asking LR to do it along with getting a permanent Pulse Busta installed, but LR may not be the way to go (nor permanent Pulse Busta? If any one in Perth is willing to led a hand I would be great full (I am in Perth some weeks/weekends). It not that I could not do it, it just the time, and I always seem to take longer than is required/I intend. And I don't want to get it wrong. Failing that MC D4, be keen to get your contact in Bibra Lake, as its close to our place in Perth.
    Reply With Quote Reply With Quote
  9. 24th January 2013, 09:47 PM #9
    MC D4's Avatar
    MC D4
    MC D4 is offline Fossicker
    Join Date
    Dec 2010
    Location
    Perth WA
    Posts
    30
    Total Downloaded
    0
    No Pulse Buster needed for me DiscoDavey as my Jayco Basestation has regular tail lights (just LED markers).

    Just PM me Gotaflat if you need the Bibra Lake contact.
    Reply With Quote Reply With Quote
  10. 24th January 2013, 10:41 PM #10
    DiscoDavey's Avatar
    DiscoDavey
    DiscoDavey is offline Fossicker
    Join Date
    Sep 2012
    Location
    Northern Suburbs, Perth
    Posts
    50
    Total Downloaded
    0
    Thanks MC D4. I'll have a crack at it myself. Between everyone that has been terrific and offered their help, I think I should be able to get job done.
    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« 19in tyre pressures in sand? | The other car's the crumple zone »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!