Page 6 of 6 FirstFirst ... 456
Results 51 to 57 of 57

Thread: Important BB6 wheel info

  1. #51
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Brian.
    I went hunting for Summerfield Engineering in Kenwick to see if they can do a 18" D4 steelie,it seems they are gone.Just did a google they are now in Baldivis.
    In the day they were the people to see for rim conversions for 4x4s and drag racing.They may be able to knock up a set of wheels for you.IF you are talking to them,see if they can do an 18" rim too.
    Andrew

    Summerfield Rim Conversions (Used to be Summerfield Engineering) - Wheels & Rims - Baldivis
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post

  2. #52
    Join Date
    Sep 2010
    Location
    east gippsland
    Posts
    282
    Total Downloaded
    0

    wheel track mods

    Hi,
    After getting several conflicting determinations as to the maximum legal increase of wheel track from multiple sources, I thought it best to go to the horses mouth. Attached is a page straight from the National code of practice regarding wheel track limits. The reason there was so much conflicting information was the changes that have taken place over the last few years. Originally the max increase was 50mm, that was reviewed after independent front suspension came in and reduced to 25 mm overall axle width, it has since be revised back to 50mm for all 4wd's. Also note that it's the "national" code of practice therefore should apply to all states.
    regards
    Brian
    Attached Files Attached Files

  3. #53
    Join Date
    Jan 1970
    Location
    Perth
    Posts
    2,248
    Total Downloaded
    0
    National Codes of Practice are not binding. Each state has the option to legislate in line with the NCOP, or ignore it. Which is why you need to know the individual state's position (and which version of the NCOP they enacted, if any).

    Cheers,

    Gordon

  4. #54
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Brian.
    Have you seen this add????
    Over east is the problem.
    http://www.aulro.com/afvb/showthread...28#post2509028
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post

  5. #55
    Join Date
    Jan 1970
    Location
    Perth
    Posts
    2,248
    Total Downloaded
    0
    Quote Originally Posted by LandyAndy View Post
    Brian.
    I went hunting for Summerfield Engineering in Kenwick to see if they can do a 18" D4 steelie,it seems they are gone.Just did a google they are now in Baldivis.
    In the day they were the people to see for rim conversions for 4x4s and drag racing.They may be able to knock up a set of wheels for you.IF you are talking to them,see if they can do an 18" rim too.
    Andrew

    Summerfield Rim Conversions (Used to be Summerfield Engineering) - Wheels & Rims - Baldivis
    Been there, done that. In the end the best we got was a 17.5Kg rim with a +30 offset - not legal, but I still have a couple left if anyone wants to buy them .....


    Cheers,

    Gordon

  6. #56
    Join Date
    Mar 2012
    Location
    Gabbadah WA
    Posts
    1,438
    Total Downloaded
    0
    Any one still running on the Performance BB6 17inch wheels where some had cracking issues ?? . I fitted the type that needed the landrover wheel nuts to my 2007 RRS 2.7TD in 2013 and to date , have had no cracking issues or any probs what so ever . Just inerested to see if there are any still out there !! .
    Certainly have been a bonus for me in that 17inch tyres can be got anywhere . Cheers .

  7. #57
    Join Date
    Jul 2010
    Location
    Bremer Bay WA
    Posts
    23
    Total Downloaded
    0
    Still running them on my D3 S, had them since 160,000 km and now on 464,000 km. Been through several sets of 265/65 x17 tyres on all sorts of roads, they've done me well, as has the quite amazing car.

    Cheers, Nathan
    Swarover

    2005 TDV6 S, Manual 7 seat
    1986 BMW 635CSI, Manual

Page 6 of 6 FirstFirst ... 456

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!