Reply With QuoteThe bottom side trim on drivers side, curls round from the bottom to the side it is quite small with 4 clips holding it in place. Turn wheels full lock to the right and it is easy to get to.
JC
Master
Hi all,
My manifold hose to the intercooler has a split up the top....
What's the best way to get to the bottom end of the hose?
Remove wheel and inner wheel arch or is there another way to access the area?
Cheers guys!
Swaggie
The bottom side trim on drivers side, curls round from the bottom to the side it is quite small with 4 clips holding it in place. Turn wheels full lock to the right and it is easy to get to.
JC
The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈
Master
Got one! I'll get up at sparrows and have a crack!
Cheers
Master
That literally took 5 minutes!
Turned wheels to full lock, snapped of (and broke all) 4 clips unscrewed clamp, unscrewed top clamp pull hose off, new one one. Test drive.
A lot more responsive now! And saved myself $180 from local dealer to do it!
Swaggie
Yes, an unfortunate collateral damage, those clips fill with mud and grit and are very difficult to remove without damage....what were they thinking!! "...don't worry, these vehicles won't need any maintenance in the future...."Originally Posted by Boofla
JC
The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈
Master
SubscriberJust got new kit, now to get some new clamps before starting, thanks for the info.
Ryall
Swaggie
Ryal, make 100% certain that the inlet and outlet pipework you are clamping the hoses to are free of oil before slipping the silicon hoses over them. even clamped up tight they can blow off.
JC
The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈
Wizard
SupporterThe long hose is easy to change, the middle length one more challenging but the short one is a complete utter b**stard! I read its about 4.5 hrs job to swap that one!
2014 SDV6 HSE - LLAMS, Tuff Ant Tree Sliders, Tuff Ant 18" rims, Nitto Ridge Grappler tyres 265/65 R18, Custom Lipo4 battery, Custom Drawer storage system https://www.box.com/s/jem0ilac3cner2mexq64
There are higher rated Silicon hoses available so you should not have to do it again.
Master
Hi Ryall,
What did the kit set you back if you don't mind me asking?
Cheers,
Ben
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks