Results 1 to 10 of 10

Thread: D3 servicing in Perth and mitch hitch cover plate

  1. #1
    Join Date
    Jul 2009
    Location
    Perth
    Posts
    15
    Total Downloaded
    0

    D3 servicing in Perth and mitch hitch cover plate

    G'day all,

    Any good tips on where to service my D3 south of perth, been using southern land rover but finding them very expensive.

    Also want to put my cover plate back on around the mitch hitch, has anyone cut theirs to do this and got any tips?

    Cheers,
    Chris

  2. #2
    Join Date
    Jan 2010
    Location
    tom price the pilbra, west aust
    Posts
    680
    Total Downloaded
    0
    Jordan rover tech Bentley

  3. #3
    RichardK is offline ChatterBox Silver Subscriber
    Join Date
    Jan 1970
    Location
    Western Australia
    Posts
    2,955
    Total Downloaded
    0
    x2 See Kevin
    RichardK

    Series IV Matrix Offroad Camper following our Discovery 3 with E Diff, BAS Remap, Mitch Hitch, Uniden UHF, Codan NGT HF, Masten TPMS, Proquip Compressor Guard, ARB Winch Bar, Milemarker Hydraulic Winch, 4x4 Intelligence Rear Wheel Carrier, VMS GPS with Rear Camera,

  4. #4
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,616
    Total Downloaded
    0
    Quote Originally Posted by Leecewah View Post
    Also want to put my cover plate back on around the mitch hitch, has anyone cut theirs to do this and got any tips?

    Cheers,
    Chris
    You cut it in half then trim the minimum off the cut edges of each piece so the each piece will fit behind the Mitch Hitch and still be retained by the tabs and screw clips.

    Garry
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon

  5. #5
    Join Date
    Dec 2011
    Location
    Forrestfield WA
    Posts
    1,306
    Total Downloaded
    0
    X3 Rovertech

    Not always perfect but they know the cars and try hard. Kevin has a D3 and has driven it to remote areas of Australia. Been servicing my D4 for a couple of years with no gripes from me.

    Bob

  6. #6
    Join Date
    May 2011
    Location
    Orange Grove WA
    Posts
    1,274
    Total Downloaded
    0
    Chris, I had my pads front and rear fitted by Jordan Rovertech and almost half the price of Southerns. Workshop is a bit rough, when compared to Southerns. I will have him do my in between services (every alternate 13k) as I do like dealing with Joe at Southerns....Joe gets things done for me and nothing is every a problem...including free bits. Jordan Rovertech is about 7kms further from you though. Don't know of any down your way.

    We can give the plate a try...have see a pic of one fitted after the Mitch hitch was added, but maybe a bit of a pita each time you want to connect your trailer lights and Anderson plug.

    The GOE seminar is worth every cent......and real easy to fit the rods.

    Brett.....

  7. #7
    Join Date
    Feb 2010
    Location
    Brisbane
    Posts
    299
    Total Downloaded
    0
    Discovery Landrover in Wangara get my vote - great service at a reasonable price.

  8. #8
    Join Date
    Jan 1970
    Location
    Perth
    Posts
    2,248
    Total Downloaded
    0
    Quote Originally Posted by HarryO View Post
    Discovery Landrover in Wangara get my vote - great service at a reasonable price.
    Not exactly south of Perth though ...............

    Cheers,

    Gordon

  9. #9
    Join Date
    Oct 2013
    Location
    Perth
    Posts
    123
    Total Downloaded
    0
    Another vote for Kevin at Rovertech - he's looked after my dad's D1 previously, but there's also Darren from Aztech4x4 in Rivervale - he's just done a gearbox service on my D3… very good!

  10. #10
    Join Date
    Jul 2009
    Location
    Perth
    Posts
    15
    Total Downloaded
    0

    Thanks and Cover plate done

    Thanks gents, will look at getting the service done by Kevin, trying to get the long range tank in first, had it all planned with ARB but then they decided that they couldn't put a rear wheel carrier on without replacing the bumper bar at a cost of extra thousands, I have seen plenty of D3/D4s with rear wheel carrier through existing bumper bar, so waiting for some quotes back from OL. Have attached (couldn't figure out how to paste them straight into the text as I have seen done) a couple of photos of the cover plate around the mitch hitch, seems to work alright although I could have trimmed a little less on each side

    Brett, welcome back, hope the rest of your trip went well. About to install a Traxide dual battery system when it arrives, should be fun noting my lack of automotive skills, have one of the weapons electrical techs from work on standby in case it goes badly...

    Cheers,
    Chris
    Attached Images Attached Images

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!