Results 1 to 10 of 10

Thread: Dolium Rear Wheel Carrier

  1. #1
    Join Date
    Jul 2009
    Location
    Gold Coast
    Posts
    3,775
    Total Downloaded
    0

    Dolium Rear Wheel Carrier

    Hi guys,

    Just a heads up for those of you with a Dolium rear wheel carrier. If you start to hear a metallic creaking noise coming from the rear of your Disco and you have a Dolium rear wheel carrier fitted check the two bolts under the bar. Mine had been creaking for a while and I thought it was due to bending the exhaust last time off road.

    Anyway it turned out to be a snapped bolt and the other had worked loose. It wouldn't have taken to much longer before the whole thing could have come unstuck.

    If you have one fitted it might be worth checking that the two bolts aren't working their way loose.
    Cheers,
    Terry

    D1 V8 (Gone)
    D2a HSE V8 (Gone)
    D3 HSE TDV6 (Unfortunately Gone)
    D4 V8

  2. #2
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,616
    Total Downloaded
    0
    Hello stranger - where have you been hiding?
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon

  3. #3
    Join Date
    Sep 2011
    Location
    Central Tasmania (formerly Adelaide Hills)
    Posts
    369
    Total Downloaded
    0
    I have the same wheel carrier aka Frontrunner. The mechanism that limited the opening apparently failed and it seems had loosened and fallen off. It took Opposite Lock several weeks to get a replacement. Later the latching mechanism became loose which allowed the carrier to swing open when driving along.

    I still think it is a good device, but I recomend regularly checking the various nuts and bolts. Perhaps some Loctite would be a good idea.

  4. #4
    Join Date
    Jul 2009
    Location
    Gold Coast
    Posts
    3,775
    Total Downloaded
    0
    Quote Originally Posted by garrycol View Post
    Hello stranger - where have you been hiding?

    Just work Garry, been that busy that we have had no spare cranial space to focus on anything else.

    Hope it will settle down a bit from here on in.
    Cheers,
    Terry

    D1 V8 (Gone)
    D2a HSE V8 (Gone)
    D3 HSE TDV6 (Unfortunately Gone)
    D4 V8

  5. #5
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,616
    Total Downloaded
    0
    Quote Originally Posted by TerryO View Post
    Just work Garry, been that busy that we have had no spare cranial space to focus on anything else.
    If you say so . Some might believe you.

    Well don't work too hard. .

    Garry
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon

  6. #6
    Join Date
    Jan 2010
    Location
    Adelaide
    Posts
    100
    Total Downloaded
    0
    Does anyone have the Frontrunner RWC with OEM reversing camera and if so does the spare wheel then obscure the camera view at all? Can you still use the camera to assist hitching up to trailer/camper? Regards, David
    Defender MY21 D300 SE: Off Road Pack,Explorer Pack, OEM Bull Bar, GME XRS, Tow Pro Elite, Ironman winch, spotlights & light bar, front undershield, Tough Ant 18" brake conversion kit: BFG K02 LT265/70/18

    Gone: Fuji White MY14 HSE; Silver D3 MY09 TDV6 SE

  7. #7
    Join Date
    Sep 2011
    Location
    Central Tasmania (formerly Adelaide Hills)
    Posts
    369
    Total Downloaded
    0
    I have the Front Runner RWC and the rear camera. Yes, the wheel does obscure some of the camera view on the driver's side. The driver's mirror and the sensors make up for the blind spot. The hitch is still readily visible and the hitch assist function / zoom work normally. The trailer reversing functions also work normally.

    I have partially covered the reversing sensor (driver side near hitch) as described elsewhere so that it functions as required.

  8. #8
    Join Date
    Jan 2010
    Location
    Adelaide
    Posts
    100
    Total Downloaded
    0
    Thanks for that Fred. I have a MY14 HSE D4 on order and wanted to know what effect putting a RWC would have on the OEM camera (I have aftermarket on my D3). My new D4 will also have the Reverse Traffic Detection (which I presume will use the sensors in rear bumper). Not sure whether that will be affected?

    For yours and other's interest I have just learnt (via personal email communication) from Dolium that an upgraded Front Runner RWC will be up on their website in about 2 wks. It will have a gas strut and auto closing lock. It was the lack of gas strut on my current D3 version with the tendency for wheel to swing into the tailgate on any slope towards passenger side that put me off slightly (was considering Outback Accessories version). However with that info now I am almost certain to get the new Front Runner version. Regards, David

  9. #9
    Join Date
    Jan 2014
    Location
    Chapel Hill, Brisbane, 4069
    Posts
    10
    Total Downloaded
    0
    So this might be a long bow, but I have a Dolium RWC fitted to my D3 and the rear parking sensors are now dysfunctional (well they are still functional but they constantly "see" the rear wheel now. What advice is out there about a fix? I had been told to mask the right hand two sensors but I can't make that work and it does not make sense.
    Any experience or fixes out there?
    thanks Dapper

  10. #10
    Join Date
    Jun 2009
    Location
    mandurah
    Posts
    1,477
    Total Downloaded
    0
    Quote Originally Posted by Dapper View Post
    So this might be a long bow, but I have a Dolium RWC fitted to my D3 and the rear parking sensors are now dysfunctional (well they are still functional but they constantly "see" the rear wheel now. What advice is out there about a fix? I had been told to mask the right hand two sensors but I can't make that work and it does not make sense.
    Any experience or fixes out there?
    thanks Dapper
    Usually just the rh sensor just off centre, is enough. Use the black self adhesive rubber furniture pads ( available from Bunnings ) Some times just the top half is will do. If you have a tyre cover make sure the bottom edge is flat. If it is raised it will be enough to trip the sensors. Plenty of posts on the forum re this issue. Do a search for more data.
    D4 2.7litre

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!