Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 30

Thread: D3 Control arm bushings liquid filled?

  1. #11
    Join Date
    Feb 2012
    Location
    Wollongong
    Posts
    773
    Total Downloaded
    0
    Gary my symptoms have been rattling (a little), uneven tyre wear (a little) and dodgy handling. The bush that goes is the rear lower bush as it cushions pretty much all impacts. Easy to test if you are inclined - jack the wheel up and shove a crowbar in and see how much fore - aft movement the arm has. A good arm will have none and worn bushes will let the arm move in and out (ie lower rear will move up to 1cm and and out from the body).

    The state of my most recent ones is very sad (considering they've only done 50000km). I have the arms laying around at the moment and could take some pics of the amount of movement in the bushes if anyone is interested.

    Poly bushes are a mixed bag but my advice from several sources was to stay away for comfort reasons and because they require lubrication and are not well suited to off road use.

  2. #12
    Join Date
    Jan 1970
    Location
    Ellendale Tasmania.
    Posts
    12,986
    Total Downloaded
    0
    A good way to check if they are shot, drive along and brake then release, a few times, you should get a clunk every time you brake.

    My whole arm were replaced, my mechanic said they do this because there are worries they could bend the arm pressing the bushes out and don't want to risk it, it's the top knuckle that is the problem, not the 2 lower bushes.

    I have my old arms at home and I'm going to test this theory and get some bushes pressed in, if it works I have some spares for next time, if not, I still have spare bushes

    Has anyone tried polyurethane bushes? SuperPro Solution for
    Land Rover Discovery Series 3


    Some info here about the lower
    control arms: http://www.aulro.com/afvb/d3-d4-rrs/...nt-issues.html
    Looking at their warranty of 60,000ks, that's not all that good, considering my OEM bushes started to go at about 70,000ks.

    EDIT; The D3 and D4 arms are different also, there is a slight change in the design, when I had mine done, there was another pair going on a D3, my mechanic showed us the slight diference.

    Baz.
    Cheers Baz.

    2011 Discovery 4 SE 2.7L
    1990 Perentie FFR EX Aust Army
    1967 Series IIa 109 (Farm Truck)
    2007 BMW R1200GS
    1979 BMW R80/7
    1983 BMW R100TIC Ex ACT Police
    1994 Yamaha XT225 Serow

  3. #13
    Join Date
    Jan 2010
    Location
    Sydney
    Posts
    18
    Total Downloaded
    0
    Quote Originally Posted by Drizzle View Post
    Mine have lasted 70,000km.

    Has anyone tried polyurethane bushes? SuperPro Solution for Land Rover Discovery Series 3

    Some info here about the lower control arms: http://www.aulro.com/afvb/d3-d4-rrs/...nt-issues.html




    I had the superpro bush installed (at 55,000k's) definitely significantly quitter than with the old knackered bushes.


    In terms of ride they seem similar during most driving but possibly a little harsher on very rough roads.


    The reason I decided to try the superpro bushes was that I didn't want to have to repeat the process in another 50,000k's. It was similar cost to either replace the whole control arms or pay for the extra labour to remove the old bushes. One of my bushes ended up getting stuck while being pressed out and had to be cut out.


    I now have had 10,000ks on the new bushes and I don't feel they are significantly different. Would be interesting to compare with a Disco with the original bushes.

  4. #14
    Join Date
    Dec 2010
    Location
    Melbourne
    Posts
    291
    Total Downloaded
    0
    I have just started to notice a clunk when I go over speed humps. Mine is MY12 with 42k's.

    Is this a warranty claim?

    Luke

  5. #15
    Join Date
    Jan 1970
    Location
    Ellendale Tasmania.
    Posts
    12,986
    Total Downloaded
    0
    Quote Originally Posted by lpj View Post
    I have just started to notice a clunk when I go over speed humps. Mine is MY12 with 42k's.

    Is this a warranty claim?

    Luke
    Can't hurt to ask besides mine started to go at around 70,000ks and I have a bullbar, rear bar, sliders, Long Range Tank, drawers, roof rack, I also do a lot of offroad and towing, so I'd say yes

    Baz.
    Cheers Baz.

    2011 Discovery 4 SE 2.7L
    1990 Perentie FFR EX Aust Army
    1967 Series IIa 109 (Farm Truck)
    2007 BMW R1200GS
    1979 BMW R80/7
    1983 BMW R100TIC Ex ACT Police
    1994 Yamaha XT225 Serow

  6. #16
    Join Date
    Dec 2010
    Location
    Melbourne
    Posts
    291
    Total Downloaded
    0
    Quote Originally Posted by Redback View Post
    Can't hurt to ask

    Baz.
    I'll see how I go and report back. This weekend will be the first chance we have had to get off road- going to VHC.

    Apart from that, its had a very easy life!

  7. #17
    Join Date
    Jan 1970
    Location
    Ellendale Tasmania.
    Posts
    12,986
    Total Downloaded
    0
    Quote Originally Posted by lpj View Post
    I'll see how I go and report back. This weekend will be the first chance we have had to get off road- going to VHC.

    Apart from that, its had a very easy life!
    If that's the case then I'd say yes definately, should last longer than 40,000ks with only on road work, off road and sand is the biggest killer of these bushes.

    Baz.
    Cheers Baz.

    2011 Discovery 4 SE 2.7L
    1990 Perentie FFR EX Aust Army
    1967 Series IIa 109 (Farm Truck)
    2007 BMW R1200GS
    1979 BMW R80/7
    1983 BMW R100TIC Ex ACT Police
    1994 Yamaha XT225 Serow

  8. #18
    Join Date
    Sep 2013
    Location
    sydney
    Posts
    116
    Total Downloaded
    0
    Mine went at 67,000km, and priced up bushes v whole arms,
    Whole arms won out taking into account extra labour to press out / in
    New bushes. Done a fair bit of off-roading so wasn't devo'd
    When they came round. Don't have to worry about fatigue with the new arms either, piece of mind.

  9. #19
    Join Date
    Jan 1970
    Location
    Bangor, NSW
    Posts
    1,508
    Total Downloaded
    0
    Just had my two lower control arms replaced yesterday, at... 80,000km. That includes hydrobush (at chassis end) and ball joints (at wheel end of arm). I've been told they replace the whole arm as it is cheaper - as labour to replace all ball joints and bushes is expensive. Replacement and wheel alignment after was covered by warranty.

    With all the recent posts about battery charging and dead batteries, there must also be some LR empathy going on! My cranking battery seems to be on last legs! Tried to start it this morning at it turned over at about half normal speed and sounded like it was injecting every other cycle, followed by hazaard lights flashing on dash, as well as low range being lit up. It is now on charge - with aux battery disconnected - but not holding much hope.

    Cheers,
    Rob

  10. #20
    Join Date
    Jan 1970
    Location
    Bangor, NSW
    Posts
    1,508
    Total Downloaded
    0
    Oh - and for the record, as well as the metallic clunk when hitting the brakes (from the worn hydrobush), I was also getting a different clunk when going into driveways (from worn ball joints). There was also a slight vagueness to the steering and ride was a little harsher than normal.

Page 2 of 3 FirstFirst 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!