I still have the pulse buster - fitted to the camper trailer so all should be good then CheersQuote:
Originally Posted by SBD4
I would have thought that as the D4 runs LED tail Lights they might have sorted out the trailer wiring to pick up LED's
Printable View
I still have the pulse buster - fitted to the camper trailer so all should be good then CheersQuote:
Originally Posted by SBD4
I would have thought that as the D4 runs LED tail Lights they might have sorted out the trailer wiring to pick up LED's
hi everyone.
to all who have contributed in this post.
update.
i think it might now be resolved,i have had great communication with the led module supplier.it was suggested the wiring including the turn indicators must be wired thru the landrover towing trailer wiring supply.
i have done this now and the icon on the dash now blinks when indicators are on and module is switched on.
when not towing switch off module.
i also had to reverse the wiring for the module as when installed would not work.as per their instructions
next thing will be to put the van on and see if it makes any difference.i hope so.anyway thanks for the advise along the way,it did help
boardrider:)