Page 1 of 3 123 LastLast
Results 1 to 10 of 26

Thread: Spare Tyre Location

  1. #1
    Join Date
    Jun 2009
    Location
    Perth
    Posts
    576
    Total Downloaded
    1.13 MB

    Spare Tyre Location

    Hi Guys, I'm a Disco 2 owner looking to upgrade the a D4 next year and one of the concerns I have with the D4 is the rear door is not the barn door style of the D2. I will be installing a long range tank and therefore each time to open the rear of a D4 I would have to open 3 things; rear wheel carrier, top door and then lower tailgate. So my questions is (as strange as it may seem) has anyone put the spare wheel inside the car, maybe in one of the storage pockets at the side for instance.

  2. #2
    Join Date
    Aug 2010
    Location
    Sydney
    Posts
    1,874
    Total Downloaded
    0
    Hi Rod,
    Jeeze that would take up some valuable space.
    Not too many option other that the RWC sorry.
    2014 SDV6 HSE - LLAMS, Tuff Ant Tree Sliders, Tuff Ant 18" rims, Nitto Ridge Grappler tyres 265/65 R18, Custom Lipo4 battery, Custom Drawer storage system https://www.box.com/s/jem0ilac3cner2mexq64

  3. #3
    Join Date
    Dec 2008
    Location
    Prospect 2148
    Posts
    581
    Total Downloaded
    0
    Rod
    Unfortunately Rich is correct. I have a RWC on the D3 (and if IIRC, Rich has as well). It really is not too much of a pain to open the carrier and the tailgates.
    The normal location of the spare is a real PITA, both when rotating the wheels and if you are unfortunate enough to have a flat (particularly if the back of the car is loaded).
    Cheers
    Mike

  4. #4
    Join Date
    Dec 2011
    Location
    Forrestfield WA
    Posts
    1,306
    Total Downloaded
    0
    I undo 4 things. Two spare wheel carriers and the two doors. Even my wife does it all the time with no complaints so, even though it is a bit of a pain, it is not a real problem.

    We often put small stuff in the boot by folding down one rear seat for access. It is also often best to just open the top door and leave the bottom one closed. Easier to reach in and stops stuff falling out. The lower door is a fantastic table. I always miss it when I go out in the barn door GQ Patrol with sagging rear door hinges due to the over sized spare wheel.

    Bob

  5. #5
    Join Date
    Mar 2007
    Location
    Kalgoorlie WA
    Posts
    5,546
    Total Downloaded
    0
    Yep - I also went from a D2 (son still has it) to the D4 and have fitted a single RWC to the rear of the D4 so that I could install a long range tank.

    Doesn't bother me at all having to swing the wheel out to open the tailgate.

    When we're out shopping, we generally don't "latch" the wheel carrier in the closed position. The gas strut is strong enough to hold it either fully open or fully closed. Just swing the wheel out of the way as you walk up to the vehicle to open the tailgate.

    And as already said by BobD - you'll find that you don't open the bottom half of the tailgate all that often anyway. You can reach most things simply by opening the top half.
    Cheers .........

    BMKAL


  6. #6
    Join Date
    Sep 2011
    Location
    Minyama
    Posts
    472
    Total Downloaded
    0
    Quote Originally Posted by rocket rod View Post
    So my questions is (as strange as it may seem) has anyone put the spare wheel inside the car, maybe in one of the storage pockets at the side for instance.
    The tyre won't fit between the C and D pillar but it can fit standing up in the back but you will lose ~270mm of width. If most of your touring is with a trailer or camper and you only keep a cooler and a few things in the back it could work.

  7. #7
    Join Date
    Apr 2008
    Location
    Brisbane,some of the time.
    Posts
    13,886
    Total Downloaded
    0
    I have thought about this a lot.
    What i would do is risk not having the spare at all around town,i would carry plugs and the air compresser,maybe a can of that temporary repair stuff.
    When away,up on the rack it goes.

    I do run LT's,and have not had a flat in over ten years.

    But my only concern is if i did this,for sure Murphy would turn up

    If i was going to put it in the back,i would probably strap it to the cargo barrier,if you have one.
    Last edited by scarry; 15th May 2014 at 05:15 PM. Reason: more info

  8. #8
    Join Date
    Jun 2009
    Location
    Sydney
    Posts
    1,563
    Total Downloaded
    0
    Like others I really don't find it a huge problem to open the RWC and the tailgate doors. Ocassionally it is a minor pain but most of the time I don't even think about it.

  9. #9
    Join Date
    Oct 2013
    Location
    Ballarat
    Posts
    251
    Total Downloaded
    0
    Big Red came with twin wheel carriers , I took off the LH side , and trained everyone how to use the back doors and fold the seats up or down to gain access into the rear .
    It is different coming from the Patrol , but is a small issue given the better vehicle .

  10. #10
    sheerluck Guest
    I started to design my own RWC, that instead of the usual manual clasp I was considering using a tailgate latch with a door actuator that I was going to bolt where one of the trailer connectors is. Was going to piggyback the top tailgate release electrics, and add a gas strut so when you press the key fob, the top tailgate pops open, and the RWC unlatches and swings open.

    I've been playing around with a couple of spare door actuators, and the tailgate latch and striker from a car I've got sat outside. I'm not convinced it will be strong enough to stop movement of the RWC though. I need to find something dustproof and hefty.

Page 1 of 3 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!