Page 2 of 2 FirstFirst 12
Results 11 to 19 of 19

Thread: Wanting To Buy A Disco3 TDV6 SE

  1. #11
    Join Date
    Jan 1970
    Location
    Brisbane, Queensland
    Posts
    5,778
    Total Downloaded
    0
    Quote Originally Posted by stamosp View Post
    I am going to take your advice on board and not going to be to worried about air bag suspension issue as long has full documented history on servicing and receipts showing what has been done on vehicle repairs etc . Also I will be looking interstate if also not just in Adelaide I have found something that I got my attention in Queensland River City Group Pty Ltd 26 Hudson Rd Albion QLD 4010 Its a 2005 Disco 3 HSE with 190,000k's Zambezi Silver $28750 TOP OF THE RANGE HSE TURBO DIESEL 7 SEATER. Fitted with ARB Bull Bar, electric winch, spotlights, snorkel, dual battery with extra power outlets, bluetooth system. With a full service history any opinions thoughts etc on this year and model ?
    Mate if can stretch the budget a little more you should consider the private sale 2008 D3 in Brissy for a little over $30k. I could look at it for you to assess whether it's worth paying for a mechanical inspection by MR automotive or Knights HOR. Knights are probably better as closer.
    L322 tdv8 poverty pack - wow
    Perentie 110 wagon ARN 49-107 (probably selling) turbo, p/steer, RFSV front axle/trutrack, HF, gullwing windows, double jerrys etc.
    Perentie 110 wagon ARN 48-699 another project
    Track Trailer ARN 200-117
    REMLR # 137

  2. #12
    stamosp Guest
    Looks good but want black interior thanks for the offer cheers

  3. #13
    Join Date
    Jan 1970
    Location
    Brisbane, Queensland
    Posts
    5,778
    Total Downloaded
    0
    Quote Originally Posted by stamosp View Post
    Looks good but want black interior thanks for the offer cheers
    Yep, prefer the black too.
    L322 tdv8 poverty pack - wow
    Perentie 110 wagon ARN 49-107 (probably selling) turbo, p/steer, RFSV front axle/trutrack, HF, gullwing windows, double jerrys etc.
    Perentie 110 wagon ARN 48-699 another project
    Track Trailer ARN 200-117
    REMLR # 137

  4. #14
    Join Date
    Sep 2013
    Location
    Brisbane
    Posts
    807
    Total Downloaded
    0
    Knock em down that's expensive

  5. #15
    stamosp Guest

    Looking at 2004 TD5 5 seat CLASSIC

    I am now looking at purchasing a Land Rover Discovery Series II TD5 it has around 150,000k's on it for $15,000. It belongs to a one owner from new and serviced every 10,000k's not the recommended 20,000k's. I am wanting to know before I was looking at a 2005 SE Disco 3 2.7 Diesel which has 140Kw and 445Nm. Compared to the TD5 which has only got 101Kw and 300Nm. I have been searching on the 2004 Disco2 2.5 Diesel compared to the 2005 Disco3 2.7 Diesel. The 2.5 Diesel is more durable and a lot cheaper to maintain than the 2.7 Diesel. My question is can they be chipped and exhaust done also larger intercooler and egr blanking without having any issues with the motor. I have been reading that you can get 160-165Kw and up to 500Nw out of the motor with not putting to much stress on it and making it unreliable or shorten its life span. This one has had fuel pressure regulator replaced and the injector harness replaced due to oil ingress and causing oil leak at front of engine which is a common problem. I now that they are renown for oil leaks the transfer case, rear main engine seal, r/covers etc. all leakers. I have had inspected by a mechanic and said to me they are renown for oil leaks. Even though it has been cleaned underneath but the usual leaks are still noticeable. Hopefully mostly seepage not oil dripping on driveway when it gets to that stage then must address issue. This one has no sunroof which I hear are known for leaking and no airbag suspension which also had issues no ACE. I do not know it has the three amigo's issue at all I have to ask if the lights come on for TC, HDC and ABS. I am wanting to increase the Kw and Torque but not to stress the engine out shorten its life any advice would me much appreciated. Also have I missed anything that I should know or look for which is a common issue with the 2004 Disco2 TD5. I have heard of engine mounts needing to be replaced but I think more for the V8 not TD5. I have decided to for the TD5 for $15,000 and keep the $10,000 for mods and future issues. Any advice would be appreciated and like to say thanks to who ever responds being good or bad comments. I like the look of it also and feels much more rugged and robust. I will be using mainly on bitumen and towing a 2.2 Tonne Boat the occasional dirt road or track not hard core 4WD cheers to all who reply.

  6. #16
    Join Date
    May 2008
    Location
    Merimbula
    Posts
    19
    Total Downloaded
    0
    Hi Stamosp

    Im out there looking for a similar machine, I've been in limbo for over twelve months after selling my 1997 discovery. Its painful with out a Land rover.

    Interesting you mentioned the one in Queensland did you look into that one as I have noticed it, and was considering a closer look. Id be keen to hear what your thoughts were. send private message if you prefer.

  7. #17
    Join Date
    Jan 1970
    Location
    Wantirna South, Vic
    Posts
    1,459
    Total Downloaded
    0
    Quote Originally Posted by stamosp View Post
    I am now looking at purchasing a Land Rover Discovery Series II TD5 it has around 150,000k's on it for $15,000. It belongs to a one owner from new and serviced every 10,000k's not the recommended 20,000k's. I am wanting to know before I was looking at a 2005 SE Disco 3 2.7 Diesel which has 140Kw and 445Nm. Compared to the TD5 which has only got 101Kw and 300Nm. I have been searching on the 2004 Disco2 2.5 Diesel compared to the 2005 Disco3 2.7 Diesel. The 2.5 Diesel is more durable and a lot cheaper to maintain than the 2.7 Diesel. My question is can they be chipped and exhaust done also larger intercooler and egr blanking without having any issues with the motor. I have been reading that you can get 160-165Kw and up to 500Nw out of the motor with not putting to much stress on it and making it unreliable or shorten its life span. This one has had fuel pressure regulator replaced and the injector harness replaced due to oil ingress and causing oil leak at front of engine which is a common problem. I now that they are renown for oil leaks the transfer case, rear main engine seal, r/covers etc. all leakers. I have had inspected by a mechanic and said to me they are renown for oil leaks. Even though it has been cleaned underneath but the usual leaks are still noticeable. Hopefully mostly seepage not oil dripping on driveway when it gets to that stage then must address issue. This one has no sunroof which I hear are known for leaking and no airbag suspension which also had issues no ACE. I do not know it has the three amigo's issue at all I have to ask if the lights come on for TC, HDC and ABS. I am wanting to increase the Kw and Torque but not to stress the engine out shorten its life any advice would me much appreciated. Also have I missed anything that I should know or look for which is a common issue with the 2004 Disco2 TD5. I have heard of engine mounts needing to be replaced but I think more for the V8 not TD5. I have decided to for the TD5 for $15,000 and keep the $10,000 for mods and future issues. Any advice would be appreciated and like to say thanks to who ever responds being good or bad comments. I like the look of it also and feels much more rugged and robust. I will be using mainly on bitumen and towing a 2.2 Tonne Boat the occasional dirt road or track not hard core 4WD cheers to all who reply.
    Having just gone from a 363k 2000 D2 TD5 Auto into a 310K 2009 D3 TDV6 SE I can tell you that the difference between the 2 is astronomical.

    Buy a D3.

    You cannot reliably get 500NM from a TD5, especially if it's an auto as the auto ECU will drop it into limp mode at about 400NM to protect the auto. Increased output brings about increased exhaust gas temperatures which will require very close monitoring particularly when towing. Regarding towing, the D3 will be A LOT better to tow with, not only because of longer wheelbase, more power, more stable etc, but particularly because of the ratio of tow ball to rear axle vs wheelbase, which is far far better on a D3. Engine mounts go on any motor, the TD5 is no exception. 3 amigos is fairly common, and quite easy to fix. A "worked" TD5 will not match a bog stock TDV6 in any form apart from very serious offroading...

    My recommendation is to buy a D3.
    Regards, Will

    Stornoway Grey '09 D3 TDV6 SE, 2015 TERRITORY Engine at 348k
    LLAMS, FYRLYTS, OL D4 Bar
    Safari Snorkel, D4 hitch, ARB CKMA12

  8. #18
    Join Date
    Apr 2014
    Location
    Sydney
    Posts
    27
    Total Downloaded
    0

    stamosp & markk

    Quote Originally Posted by stamosp View Post
    I have found something that I got my attention in Queensland
    River City Group Pty Ltd
    26 Hudson Rd
    Albion QLD 4010
    Its a 2005 Disco 3 HSE with 190,000k's Zambezi Silver $28750
    TOP OF THE RANGE HSE TURBO DIESEL 7 SEATER.
    Fitted with ARB Bull Bar,
    electric winch,
    spotlights,
    snorkel,
    dual battery
    with extra power outlets,
    bluetooth system.
    With a full service history
    any opinions thoughts etc on this year and model ?
    I've enquired about this car, A guy bought it realized how much work it was going to be then traded it. The salesman is not very negotiable with the price as said he has spent around $4K on it already and there is still a small issue with the "leveling" of the suspension (one corner sits 10mm lower) he will "pay to fix this if needed". I spoke to the servicing mechanic and he said it was "f*****d" and needed $5-6K spent (reconcile this with the dealer spending however you want). If you have the time/budget it may be worth a look with all the bull bar snorkel etc taken away from spending down the track, but I would really be doing my homework on the service history as It doesn't seem to have been looked after over the years.

    RE the TD5 I was in the same boat looking at modifying a cheaper D2 but if you test drive them both its pretty easy to end up back with the D3.

    Good luck with your search I have to wait until saturday for mine, Its going to be a long week.

  9. #19
    Join Date
    Sep 2013
    Location
    Brisbane
    Posts
    807
    Total Downloaded
    0
    The more bits hanging off it the more likely it has seen some hard work - of course it could have been loved by an enthusiast or it just could have got by....

Page 2 of 2 FirstFirst 12

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!