Thread: Bullbar underbody protection

I think I can help you there

If I get out early enough (and it's light still) will try to get some pics...

If you fit a ARB or OL bar then you get plenty of great underbody protection back to the OEM steel plate that covers the sump etc.

Yes you can get a protection plate for the auto and nearly everything else you can think off if you really want to, but in my opinion most are serious overkill other than the compressor protection plate that Gordon (GOE) sells.

Add in a good set of rock sliders and you have most everything you need covered.

The first thing that usually gets flattened is the dual exhaust pipes that go under the diff, but I had mine replaced by the local exhaust shop for, from memory, $120, so that's no big deal.

I make a replacement heavy-duty plate for the underside of the ARB bar, will consider one for an OL bar if there's the demand.

Cheers,

Gordon

I've had the opportunity to test my clearance and can say without the protection I would have done some much more serious damage.
I'm plated from the bar back to the back of the TCase and then under the tank as well - I really mashed that up!

Attachment 80444

Attachment 80445

Attachment 80446

I then added some sliders
Attachment 80447

Next will be compressor guard, air tank guard, Arm sliders and rear diff guard.

Tombie how much was the Ironman Engine / Transmission protection plate kit?

$450

Hi Tombie, where did you get the fuel tank cover from? Was it a custom job?