The cause could be a broken sensor wire still within its insulation so that it only sometimes looses contact. My D4 developed such a fault and inconsistent behaviour.
Hi all. My D3 has recently started doing weird stuff with the rear parking sensors. They will function as normal, with the beeping increasing tempo as I get closer, BUT they will also sometimes sound a solid tone when there is nothing behind the vehicle. This is intermittent, obviously only when in reverse.
Is there a known issue with this, and a fix? I've searched already.
Thanks
Regards, Will
Stornoway Grey '09 D3 TDV6 SE, 2015 TERRITORY Engine at 348k
LLAMS, FYRLYTS, OL D4 Bar
Safari Snorkel, D4 hitch, ARB CKMA12
The cause could be a broken sensor wire still within its insulation so that it only sometimes looses contact. My D4 developed such a fault and inconsistent behaviour.
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
Mine meant there was dirt around the sensor face and grommet..
Pressure wash sorted it all![]()
We had ours turned off, so much better.
Baz.
Cheers Baz.
2011 Discovery 4 SE 2.7L
1990 Perentie FFR EX Aust Army
1967 Series IIa 109 (Farm Truck)
2007 BMW R1200GS
1979 BMW R80/7
1983 BMW R100TIC Ex ACT Police
1994 Yamaha XT225 Serow
G'day Will,
I had the same thing: sometimes it worked, but mostly I got the solid beep. I tracked it down to one sensor, working this out by selecting reverse, glen selecting neutral on a flat surface and getting out and covering each sensor until I found the faulty sensor (obviously don't put the park brake on). Low- tec solution, I have just covered the sensor with a wad of blu-tac. I need to replace it but I haven't got around to it as yet.
James
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks