D4 MY14 Reversing Camera Install

**cjc_td5** · 9th August 2016, 09:24 PM

Originally Posted by Lukeis

Hey guys, I have attempted to follow you posts and keep up with the lingo..

I have a 2011 d4 with touch screen and reversing camera. The lines are on the screen however they do not bend.

Two questions:
1) would buying the latest camera be interchangeable and therefore give me the bendy lines?
2) I do not have an option to bring up the cameras without being in reverse gear, however I can go into the secret screen and get it that way. Is there a way this can be changed in the CCF? Is. Add it as a menu item

1) The bendy lines only came in when the Meridian audio system was introduced. The camera has a CANBUS connection so it can plot the lines. I presume your MY11 D4 will not have the CANBUS connection in the wiring, or the ECU to drive it.

2) I do not believe you can select the camera itself in the pre Meridian system.

**l00kin4** · 10th August 2016, 07:35 AM

Originally Posted by kenl

I had always thought that the bendy lines were for trailer assist and required the surround camera set up?

Way back in this thread somewhere we did confirm that you can get bendy lines without the surround camera setup BUT I think (haven't spent the $400 to prove it and probably won't) this needs the later version of the camera as mentioned above.

David

**Meken** · 10th August 2016, 07:10 PM

Yes I get bendy lines without surround cameras - my15 hse

**malibu** · 11th August 2016, 08:12 AM

I have a 2013 HSE with static reverse lines and would like to upgrade to bendy reverse lines. It looks like I need to upgrade my camera. Can any please provide part number. Also do I need to upgrade any firmware or change any ccf settings.
Regards
Mark

**l00kin4** · 11th August 2016, 08:27 AM

Originally Posted by l00kin4

One more addition to this. Using VIN for an MY14 fitted with the factory reversing camera (thanks Scott), I checked the camera part number. Some time early in the life of MY14 D4's, the camera has changed from LR023365 (superseded by LR043493) to LR051728- which I assume is the CAN bus connected version... I haven't been able to verify this or find a picture yet.

David

For the camera part number, this is what my research tells me (it's around $400 plus shipping from UK). Don't know the answer re CCF or firmware.. You may also need a loom change in the tailgate for the CANBUS connection from camera to top of load area.

David

**cjc_td5** · 11th August 2016, 09:38 AM

Malibu, do you have the Meridian audio system or HK?

Sent from my SM-G920I using AULRO mobile app

**malibu** · 15th August 2016, 11:11 AM

The car has the HK stereo. How does the stereo make a difference?
Kind Regards
Mark

**l00kin4** · 15th August 2016, 01:55 PM

Originally Posted by cjc_td5

1) The bendy lines only came in when the Meridian audio system was introduced. The camera has a CANBUS connection so it can plot the lines. I presume your MY11 D4 will not have the CANBUS connection in the wiring, or the ECU to drive it.

2) I do not believe you can select the camera itself in the pre Meridian system.

What Chris said above...

David

**malibu** · 15th August 2016, 03:32 PM

That makes sense. Did the surround camera have bendy lines? If so could I add the surround module?

**kenl** · 15th August 2016, 08:42 PM

With a big enough check book you can do anything!!

But, you have to ask your self, are the bendy lines worth it?

Thread: D4 MY14 Reversing Camera Install

Thread Tools

Camera

HK

surround

Bookmarks

Bookmarks

Posting Permissions