Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 29

Thread: Locking with the bonnet up

  1. #11
    Join Date
    Dec 2011
    Location
    Sydney
    Posts
    191
    Total Downloaded
    0
    Short trips and infrequent use are the main reasons I guess.
    Alternator doesn't keep up with usage.
    Regards
    Barry

  2. #12
    LGM's Avatar
    LGM is offline Master Silver Subscriber
    Join Date
    May 2010
    Location
    Dongara on the Mid West Coast WA
    Posts
    384
    Total Downloaded
    0

    Plug it in!

    I don't need to open the bonnet. I put my D4 batteries (x2) on charge about once every 3 to 4 months just to be sure. I don't use the connections under the bonnet but rather charge via the andersen plug at the rear of the vehicle which is part of my Traxide dual battery system.

    The D4 remains locked up while the battery charging takes place. As the Meercat says 'Simples'

  3. #13
    Join Date
    Mar 2009
    Location
    Port Stephens N.S.W
    Posts
    3,158
    Total Downloaded
    0
    Quote Originally Posted by Stuart02 View Post
    I just pop the charger in the engine bay and shut the bonnet... No harm no foul?
    That's all I do.

    Simples !

    Sent from my iPad using Braille
    Kev..

    Going ... going ... almost gone ... GONE !! ... 2004 D2a Td5 Auto "Classic Country" Vienna Green

    2014 MUX LST with fruit
    2015 Kimberley Kamper "Classic"

  4. #14
    Join Date
    Mar 2007
    Location
    Kalgoorlie WA
    Posts
    5,546
    Total Downloaded
    0
    Quote Originally Posted by LGM View Post
    I don't need to open the bonnet. I put my D4 batteries (x2) on charge about once every 3 to 4 months just to be sure. I don't use the connections under the bonnet but rather charge via the andersen plug at the rear of the vehicle which is part of my Traxide dual battery system.

    The D4 remains locked up while the battery charging takes place. As the Meercat says 'Simples'
    Same here.

    And when we're camping out with fridge running etc - a portable fold-out solar panel with its own controller is plugged into the same Anderson plug to keep up with consumption.

    I often run three batteries when travelling / camping. As well as the charging battery and the Optima yellow top under the bonnet as part of the Traxide DBS, there's an Engel battery pack in behind the drawers / fridge that has various switched outlets / gauge etc. This battery pack is also connected to the Traxide DBS. Plugging in via the rear external Anderson plug overnight occasionally brings all three batteries up to full charge.

    Works for me.
    Cheers .........

    BMKAL


  5. #15
    Join Date
    Aug 2013
    Location
    ACT
    Posts
    664
    Total Downloaded
    0
    The reason I want to charge at home is the car will be left idle for a few weeks.

    I have connected the charger to a weekly timer so that the charger will kick in once a week.

    A point made previously about not locking the car up is that it will use more charge.

    So if I leave my car with bonnet up and not on charge will it use significant battery charge ?

    I have found that after leaving my car for a couple of weeks I got the low battery warning. I have a traxide dual battery set up so did not expect this.

    As mentioned you can charge the aux battery via the traxide Anderson plug and you can charge the main battery via the white round plug
    Is one approach better than the other ?

    Richard

  6. #16
    Join Date
    Feb 2013
    Location
    Wamuran, Qld
    Posts
    786
    Total Downloaded
    0
    Hi Richard
    I think either way would work.
    I charge via the rear anderson plug that's part of the Traxide DBS.
    I do have a plug that's compatible with the white round socket at the rear - still in its original packaging unopened. If you want it, PM me your address and I'll send it to you. For free - but only because you're a fellow D4 and AOR owner.
    Cheers
    Ron
    Ron

    2013 D4 SDV6 SE

  7. #17
    LRD414's Avatar
    LRD414 is offline Super Moderator Subscriber
    Join Date
    Oct 2014
    Location
    Brisbane
    Posts
    3,737
    Total Downloaded
    0

    I think both batteries get charged

    Quote Originally Posted by wbowner View Post
    As mentioned you can charge the aux battery via the traxide Anderson plug and you can charge the main battery via the white round plug
    I understood that the Traxide kit rear Anderson plug will charge both the cranking and aux batteries due to the way the batteries are connected. Happy to stand corrected on this if I'm wrong. Tim will confirm.

    Cheers,
    Scott
    D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
    Link to my D4 Build Thread
    D3 2005 V8 Petrol
    Ex '77 RRC 2 door. Long gone but not forgotten.

  8. #18
    Join Date
    Aug 2013
    Location
    ACT
    Posts
    664
    Total Downloaded
    0
    Quote Originally Posted by RHS58 View Post
    Hi Richard
    I think either way would work.
    I charge via the rear anderson plug that's part of the Traxide DBS.
    I do have a plug that's compatible with the white round socket at the rear - still in its original packaging unopened. If you want it, PM me your address and I'll send it to you. For free - but only because you're a fellow D4 and AOR owner.
    Cheers
    Ron
    Ron
    Many thanks for the offer but I already have one.

    I have used it to charge the car but ended up connecting the CTek connectors to battery which makes charging very easy.

    So I have 3 options.

    I will try the Anderson plug approach next.

    I had not picked up by on you being Ron from AOR, a good mob of people there

    Thanks again,

    Richard

  9. #19
    Join Date
    Aug 2013
    Location
    ACT
    Posts
    664
    Total Downloaded
    0
    Quote Originally Posted by LRD414 View Post
    I understood that the Traxide kit rear Anderson plug will charge both the cranking and aux batteries due to the way the batteries are connected. Happy to stand corrected on this if I'm wrong. Tim will confirm.

    Cheers,
    Scott
    Scott
    That is my understanding as well, I just didn't phrase it well above.

    I meant to say charge both via the Anderson plug, like wise if you use the white plug you are charging both but this time via the main battery. All due to traxide connections.

    However I think I have read that if the batteries got flat then this may not work, but will leave to Tim to explain.

    Richard

  10. #20
    Join Date
    Apr 2008
    Location
    Brisbane,some of the time.
    Posts
    13,886
    Total Downloaded
    0
    Quote Originally Posted by wbowner View Post
    Scott
    That is my understanding as well, I just didn't phrase it well above.

    I meant to say charge both via the Anderson plug, like wise if you use the white plug you are charging both but this time via the main battery. All due to traxide connections.

    However I think I have read that if the batteries got flat then this may not work, but will leave to Tim to explain.

    Richard
    If the Anderson plug is wired to the auxillary battery in normal circumstances you will be charging both batteries.

    But if the main battery voltage is around 12v or lower and the traxide relay has dropped out,you will be charging the auxiliary battery only.
    In this case the only way to charge the main battery would be through the main battery terminals,or possibly through the white plug.

    I have the Cteck plug permanently wired to the main battery,therefore both batteries are charged.If the traxide relay has dropped out,it doesn't take long before it comes in,as it senses the voltage on the main battery only.

Page 2 of 3 FirstFirst 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!