From memory latch on drivers side, has a micro switch attached to the bottom of it. You can just remove the switch itself & clean & adjust as required, if this doesn't work you will require a new switch.
Cheers
As the title says, I'm getting the bonnet open message, however the bonnet is closed. I'll have to wait until i get home in a few hours before I have a look at what the issue is, so in the mean time cane anyone tell me where the sensor is and if it's easy to adjust
Shane
2005 D3 TDV6 loaded to the brim with 4 kids!
http://www.aulro.com/afvb/members-rides/220914-too-many-defender-write-ups-here-time-d3.html
From memory latch on drivers side, has a micro switch attached to the bottom of it. You can just remove the switch itself & clean & adjust as required, if this doesn't work you will require a new switch.
Cheers
This is it:
http://www.aulro.com/afvb/d3-d4-rrs/...ml#post2238949
Kudos to ~Rich~ for the great photos!
 Fossicker
					
					
						Supporter
					
					
						Fossicker
					
					
						SupporterBought the switch for ours on Ebay - about $30 from memory. Fixed the issue entirely
thanks guys, I got the bonnet open message to disappear with a decent bonnet closeIm waiting for some new bonnet struts to arrive as the old ones failed completely, so I'll have a look at it a bit more closely once they are in
Shane
2005 D3 TDV6 loaded to the brim with 4 kids!
http://www.aulro.com/afvb/members-rides/220914-too-many-defender-write-ups-here-time-d3.html
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks