Printable View
I have just had fitted a set of Kumho AT52 in 265/70R18. Very slight rubbing on turning full lock. But I will look into more when I'm away from traffic noise. So far, pretty happy, quiet on the highway at 100-110 KPH in the wet.
Does anyone how how to reset the tyre size in the computer using a scan tool to correct the speedo? I did it with my old tyre change, but now I cant access it.
With a Gap tool I think it's in the IPC settings, you might want to try them out at access height and then see where they rub.
265/70? or 265/65 or 265/60?Quote:
Originally Posted by TheDonsWay
265/70 is a "rub almost everywhere" tyre at 32.6" diameter. If your suspension drops you wont be driving anywhere.
They are 265/70 R18. I did have 265/60 R18 on it.
Not a lot of rubbing even at access height. A little bit on turning left full lock, over some bumps in the road. At normal height, a bit on left turning full lock only.