Hi All
I just posted the following on this thread http://www.aulro.com/afvb/d3-d4-rrs/...etc-etc-3.html
	
		
			
			
				
					
 Originally Posted by 
Oztourer
					 
				 
				I've found my problem!!


After not being able to get any response with my Nanocom trying to re-learn my non-functional fob remote, I took the plunge and cut it open (the button covers were ruined anyway so I had nothing to lose). There are several posts around describing how to open these fobs but I just took to it with a sharp Stanley knife, cutting through the join seam around the perimeter, taking care not to to cut too deep and also not to slip and cut myself!! Looking at the PCB under a magy-lamp I found a cracked solder joint on one of the battery terminals. A quick dab with the soldering iron and voi la - one resurrected fob remote!! This simple exercise has saved me several hundred dollars on a new replacement. 

 Attachment 100638
Attachment 100638
Fob PCB removed showing location of cracked battery terminal joint.
Attachment 100639
Zoomed in view of cracked joint.
Attachment 100640
Another view of cracked joint
Opening the case destroyed it so I'll have to find a replacement on-line. Can anyone recommend a decent replacement case supplier?
Hope this helps someone in a similar predicament.
Cheers
Matt
 
	 
 
				
			 
			
		 
			
				
			
			
				Oztourer
MY05 TDV6 HSE, Buckingham Blue
Front Runner Slimline II roofrack and rear ladder, Safari Snorkle, Mitch Hitch, Traxide D3-DU, Bushman Fridge, Icom IC-440N UHF, Hema HN7, Tyredog TPMS, GVIF and reversing camera
			
			
		 
	
Bookmarks