Page 3 of 5 FirstFirst 12345 LastLast
Results 21 to 30 of 46

Thread: 18" D697 noise

  1. #21
    LRD414's Avatar
    LRD414 is online now Super Moderator Subscriber
    Join Date
    Oct 2014
    Location
    Brisbane
    Posts
    3,737
    Total Downloaded
    0
    Quote Originally Posted by Russrobe View Post
    Ouch $150 each?? Is there $600 worth of extra grip there???
    Time will tell. Relative lifespan will come into it as well, which time will also tell.
    D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
    Link to my D4 Build Thread
    D3 2005 V8 Petrol
    Ex '77 RRC 2 door. Long gone but not forgotten.

  2. #22
    Join Date
    Feb 2014
    Location
    NSW
    Posts
    192
    Total Downloaded
    0
    Quote Originally Posted by LRD414 View Post
    I run 265/60/R18 and still have one D697 as the spare.
    I haven't had the KO2s long enough for a complete/full comparison (~8k km) across all my usage types (city/highway/4WD track/outback roads/beach)

    The KO2s are noisier from new until the D697s get fairly worn and then they make a similar noise too.
    It's a typical harmonic type hum at 50-60 kph especially on coasting.
    I don't find it annoying or intrusive from either tyre but it is there.

    Both tyres have excellent manners on bitumen, both highway driving and city driving. I haven't experienced any tram-tracking.

    Offroad. I haven't had the KO2s on for outback touring yet but am hopeful we will get a trip in this year.
    This will be a very interesting comparison I think because the D697s really excelled for touring, although I didn't get the same life as others report.

    However, I have done a few 4WD'ing trips and used the KO2s on a range of track terrains from scrabbly to rocky to sandy and a little bit of mud.
    The KO2s traction in all these situations has been very impressive and I think better than the D697s although I'd say that's still a bit subjective at this stage.
    They have handled some pretty sharp rocky sections with barely a mark, which the D697s did as well.

    There was a $150/tyre cost difference when I was looking so that is something else that comes in to play.

    While I was happy with the 697s the only way to really compare is to do it yourself and I didn't want to die wondering.
    If the KO2s handle outback touring like the D697s then they will probably get the overall win due to offering better traction in scrabbly situations.

    Cheers,
    Scott
    Similar feedback on K02s after 5k from new - yes a definite harmonic hum (a rumble?) between 50-60kph - enough to be able to used as an audible speedometer! But not enough to be annoying.
    Excellent on gravel.
    Need to go lower pressures by a couple of psi on sand, as they tend to "bite" harder rather than float vs a standard highway terrain tyre.

  3. #23
    PeterJ Guest

    Different observation

    Okay, D697's about half worn, returning to Adelaide from Hamilton (Vic) via Harrow, Edenhope and Naracoorte a couple of weekends ago, the rain & wind was very ugly, a lot of water on the road and in puddles on the near side. I was towing the van (3.2 T) so had already dropped to 80 kph because of the overall conditions but also because on quite a few occasions the fronts, particularly the LH Front aquaplaned, had both fronts do it about 50km out of Kieth, SWMBO was wide eyed and nearly dropped a stitch on the knitting . Never had it before, has anyone else experienced it, any comments on their wet weather performance? Particularly as they wear a bit? Must stress, there was a lot of water, but still, I am wondering.

    Thanks

    Peter

  4. #24
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,033
    Total Downloaded
    0
    Don't forget that the significant weight on the tow-ball from a heavy van reduces the weight on the front and therefore grip in marginal situations.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

  5. #25
    PeterJ Guest
    Quote Originally Posted by Graeme View Post
    Don't forget that the significant weight on the tow-ball from a heavy van reduces the weight on the front and therefore grip in marginal situations.
    Yes, true. Never noticed it with the standard Pirelli but then totally different type of tyre. Which raises another question, has any one measured corner weights?

  6. #26
    Join Date
    Jan 1970
    Location
    NSW Far South Coast
    Posts
    685
    Total Downloaded
    0
    Taking Graeme's point about the heavy van on the tow ball, I'm now using the idea of DROPPING the front tyres pressures a few PSI, about 3, because of the loss of some weight off the front wheels. Seems to work really well.
    Also, add 4 or 5 PSI to the front tyres on the van.
    All adds to the great towing experience of the Disco, and no WDH in sight!

    Regards
    Trevor

  7. #27
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,033
    Total Downloaded
    0
    I have the front tyres on my dual axle van at slightly lower pressure than the rear to discourage van tail-wagging, not that the van has exhibited any such tendency to date.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

  8. #28
    Join Date
    Jan 1970
    Location
    NSW Far South Coast
    Posts
    685
    Total Downloaded
    0
    Graeme
    My understanding is that the fronts should be higher than the rear, not lower, because of the extra heat build up of the front tyres due to the extra work they do.

    Have a look at this

    Varying tyre pressures in Tandem Van to reduce Sway - Page 2 - Caravaners Forum

    Regards

  9. #29
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,033
    Total Downloaded
    0
    I didn't read the whole thread but CR was advocating never having the front higher than the rear. I run my 2.5t van tyres at around 32 front and 34 rear for 100 kph sealed roads.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

  10. #30
    Join Date
    Jan 1970
    Location
    NSW Far South Coast
    Posts
    685
    Total Downloaded
    0
    Graeme

    My mistake. I just re-read the post and checked my tyres, and yes the front should be LOWER than the rears.

    Not my first seniors moment today, probably wont be my last.

    Today I fitted new pads front and rear, and new pad wear sensors. However, I fitted the front sensor to the pads before I fitted the caliper and ended up breaking the sensor. Bugger.

    Also, who designed the pad sensor wiring!!! I have to remove the wheel arch cover just to plug the end of the sensor in. Stupid!!

    Regards

Page 3 of 5 FirstFirst 12345 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!