Thread: Free fault code read and clear on offer - Melbourne East/South East

Of course you don't get anything for free.....

I have had some issues with getting my Nanocom Evo2 to work consistantly with my D4 and Nanacom are helpful but not able to resolve remotely.

So next step is I need a D4 (or D3 as backup, I also have the D3 unlock code) volunteer just to plug in my unit and see if the VIN is detected.
Process of elimination, is it my vehicle or the unit.

So all those D4 (or D3) owners around the East or South East of Melbourne, who would like a free fault code read and clear?

Step forward before I start tracking you down individually

Got your PM, will call.

Turns out it needs to be a D4 btw, .
CANbus network is different from the D3.
The D4 architecture is 11bits and the D3 is 29bits (so the story goes).