Thread: I hate getting others to work on my cars!

looks like a replacement wheel bearing won't get here until mid next week at this stage. great.......

Originally Posted by shanegtr

looks like a replacement wheel bearing won't get here until mid next week at this stage. great.......

You might get one quicker off fleabay

Hah just went through a similar thing. Had someone add some wiring for a dual battery monitor in my car and tracing their work, they've basically just shoved the wiring under the battery dust cover and slammed it shut. I now need to go back over it and clean it up (cut a groove in the cover and add a grommet probably).

I've given up on the two local auto leckies. One is honest but does average work at best and the other just speaks rubbish or lies I can tell which.

The last work given to the honest one was to fit a tow pro. I worked out where to fit the head unit, put in a draw cable from front to back, bought extra cable length to reach, pulled off dash panels to show where to fit the controller. I got it back with a chip out of fake wood panel around the control switch, the cable under the carpet instead of using the draw cable through the sill cavity, the sill plate plastic catches mostly bent as the plate wasn't fitted properly and the unit doesn't work properly. I went back to get it rectified. As far as they are concerned all good but want it for a day with the trailer when wasn't satisfied. I didn't go back and they didn't get paid.

I didn't have time to fit it before. Now I have to find time to undo the mess and fit the thing properly. I see that chip every day.

Originally Posted by shanegtr

I'm a bit peeved at the moment and feel like having a whinge. There's a dam good reason I work on my own cars - on the rare occasions that I get someone else to do something they always seem to stuff something up. Got my disco in to do a rear wheel bearing now. Seems they have managed to damage the new bearing putting it in. May be Monday before a replacement gets here. Trouble is I had planned to leave to Tom Price on Sunday night as i start a new job there on Tuesday. So probably going to have to organise a last minute flight up there or a last minute drive the way things are going.

Sent from my GT-I9505 using AULRO mobile app

And sadly Shane, I think we are in the worst major city in Australia for rubbish landrover mechanics especially the D3/4. I understand your thinking entirely having had the D3 for 6 years now, I have all too often been where you are. The one thing that may help in the future is the only faultless D3 mechanic I've found in Perth is Dave Dover he works out of the UK centre at Wangara. He's the only Mechanic in Perth that gets to work on my car now. Apparently the other guys there are supposed to be good also but I can't speak from personal experience. Of course the only problem with Dave now is that he's so busy it's hard just to get hold of him let alone book a job in at short notice.
Apart from that mate, take a deep breath, remind yourself that everyone makes mistake and punching people dosen't help LOL