Quite likely they are old codes that have not been cleared, as I found when I first looked at the codes after purchasing my Nanocom.
 Fossicker
					
					
						Subscriber
					
					
						Fossicker
					
					
						Subscriber General Fault code question
 General Fault code question
		Got my tranmission converted to the metal sump with replaceable filter, and along with the invoice I received an "Autologic Quick test Report" which found "11 modules with faults".
Looking at the faults listed I have no idea if it is a current issue, a historical issue, or indeed no issue.
E.g:
"B1A96-68 BUS Still Active after Shutdown request" in Audio Amplifier Module. Stereo works just fine as far as I can tell;
"U2002-01 Switch general electrial failure" in Parking Brake Module. Again, no issues as far as I can tell.
"P044A-16 Exhaust Gas Recirculation Sensor C - Circuit voltage below threshold". Again, no issues as far as I can tell.
All up, 11 modules with faults, and 14 modules not responding. Do I have a problem?
Cheers,
Scott
Quite likely they are old codes that have not been cleared, as I found when I first looked at the codes after purchasing my Nanocom.
Cheers, Dale
PIC - It comes with the Territory
'The D3' - 2006 TDV6 HSE
2008 Kimberley Kamper Sports RV
Previously Enjoyed:
2002 Adventure Offroad Campers 'Cape York'
2000 D2 Td5 - plus!
1997 Defender 110 Wagon - fully carpeted
Some faults (DTC's) trigger other ones. If everything is operating fine then clear the faults and check again to see if any reappear.
 Fossicker
					
					
						Subscriber
					
					
						Fossicker
					
					
						SubscriberThanks Folks. Will be getting a service shortly so will ask for the codes to be cleared and see how I go.
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks